Jump to content
John S

1941 Plymouth steering wheel adapter

Recommended Posts

What a fantastic looking original!

What is wrong with the original steering wheel?

 

Sorry, but no answer to your original question.

Share this post


Link to post
Share on other sites

Sorry no info on adapters but sure would like to see a picture of the interior with the current set-up

Share this post


Link to post
Share on other sites

Very nice 41,

 

The only way to adapt a different wheel is to get a trashed Mopar wheel that fits the splines on your steering shaft, and cut out the center and use it to make an adapter to mount your aftermarket wheel.  Don't think anyone has ever made a commercial adapter  for a Mopar steering shaft.   If you go with a smaller steering wheel and keep the stock steering box, it may be difficult to park or do any slow. tight turns.  You may wind up going back to the stock wheel.  if you're converting to something like a rack and pinion, everything will change, including the shaft, so you may not need to make the adapter.  

                                                                                                                                                                    brian b

Share this post


Link to post
Share on other sites

   My mind is reeling for a response, Don't do anything! Are you in Sweden? Build a rat rod with your parts. Leave the car alone and drive it a bit, anyway, before you ruin it. I'll stop, NOW. 

Edited by 9 foot box
Less of a rant.

Share this post


Link to post
Share on other sites
On ‎3‎/‎6‎/‎2019 at 5:07 AM, 9 foot box said:

   My mind is reeling for a response, Don't do anything! Are you in Sweden? Build a rat rod with your parts. Leave the car alone and drive it a bit, anyway, before you ruin it. I'll stop, NOW. 

 

I dont like rat-rods, they suck. But i do like hot-rods and customs.

My 41 will be built as i want it with a 318/904 and its already on its way.

Yes, im in Sweden.

Edited by John S

Share this post


Link to post
Share on other sites

   John S.,   Of course you are. Welcome to the forum and good luck with your build. A lot of information here, if you need it. 

Share this post


Link to post
Share on other sites
On 3/1/2019 at 5:15 PM, junkers72 said:

3 bolt grant for 1955-1962 full size Ford adapter works.4231C72F-E302-400E-8B7D-B7D129980703.jpeg.5552dceaca43d1c8943dc236fa007f49.jpeg

 

 

That is priceless information.   Dont tell grant cause they'll charge more under a new mopar parts lisiting!

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.

Terms of Use