3046moparcoupe Posted January 23, 2019 Report Posted January 23, 2019 I did take quite a few pictures and made quite a few diagrams when dis-assembling, but here's another example of where I failed to preserve the info I needed to. Question please for my fellow 46-48 P15 forum member owners. Does the glove box door striker mount up to the outside or the inside (in front or behind) of the glove box door lip ? I attached a couple of pics to eliminate confusion with the question I'm asking. If someone could take a look for me and let me know back it would be greatly appreciated. Thanks for the help. Steve Quote
knuckleharley Posted January 23, 2019 Report Posted January 23, 2019 Dood! Did you do those drawings? They are amazing. I wish I had that kind of ability! 1 1 Quote
3046moparcoupe Posted January 23, 2019 Author Report Posted January 23, 2019 (edited) I always liked to draw, I really enjoyed doing lettering, sign work, stuff like that, but I'm getting older and definitely not as steady as I used to be...( heck, I wish I had the second nature mechanic ability so many here on the forum process, it's always greener on the other side I suppose),...anyway thanks for the reply Knuckleharley. In one of my pics I took back when tearing down, I got just the very edge of this striker in the photo, so I believe it mounts up to the outside/front side of the glove boor door lip like I'm showing in the first attached picture...course if I was sure I wouldn't be asking,..I suppose I should be able to just go slow and through process of elimination determine which way it lines up best with the door latch (without screwing things up, getting something in a bind, etc.) but hopefully someone will be able to just take a quick look for me, and I should be a step ahead of the guessing game. Steve Edited January 23, 2019 by 3046moparcoupe Quote
Cold Blue Posted January 24, 2019 Report Posted January 24, 2019 My P15 striker plate mounts like the pic shows, and works well. Hope this helps.. 1 Quote
3046moparcoupe Posted January 24, 2019 Author Report Posted January 24, 2019 (edited) Cold Blue, thank you very much. I really appreciate it. I just got back inside from working at aligning up the glove box door so that it was a fit to the dash opening, then I loosely attached the striker to the lip the way I thought it was supposed to go, (opposite of the way you show in your picture), then fortunately while easing the door towards the striker I could see through the side gap opening, and the head of that bolt on the striker looked to be way too low. ..even when I rotated the bolt head (which is offset like a cam), it still looked way too low,..... So again THANK YOU FOR YOUR TIME AND EFFORT, your picture confirms what I felt I was seeing, lapping the striker plate around to the back side will raise the striker assembly a good 3/16 " or so... Wish I could return the favor.. Steve Edited January 24, 2019 by 3046moparcoupe Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.