FredR Posted November 30, 2018 Report Share Posted November 30, 2018 I have a 1947 Doge 1/2 ton truck, does anyone know how to install a dome light in the carboard headliner? The dome light has tabs on the sides of the unit and looks like it would not sit flush with the headliner. Quote Link to comment Share on other sites More sharing options...
Jerry Roberts Posted December 1, 2018 Report Share Posted December 1, 2018 It should not fit flush with the headliner , it must be spaced down a little bit so that the bezel and lens has enough room to snap in place . The original had flat leather washers used around the screws as spacers , perhaps 1/8 thick or less . Probably some flat faucet washers would work here , or just cut your own washers with a Harbor Freight hole punch set . Quote Link to comment Share on other sites More sharing options...
FredR Posted December 2, 2018 Author Report Share Posted December 2, 2018 Thank you Jerry Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.