Gaige Posted November 10, 2018 Report Share Posted November 10, 2018 How do I remove the gear shifter on the transmission. It is located on the top of the transmission. Quote Link to comment Share on other sites More sharing options...
Gaige Posted November 10, 2018 Author Report Share Posted November 10, 2018 I am trying to pull the engine out with the transmission attached. All bolts, master cylinder, foot pedals are off. I am just stuck getting the shifter off. I thought it would be something simple. Any help would be appreciated. Quote Link to comment Share on other sites More sharing options...
HotRodTractor Posted November 10, 2018 Report Share Posted November 10, 2018 You have to unbolt the top plate that the shifter goes into. Quote Link to comment Share on other sites More sharing options...
Gaige Posted November 10, 2018 Author Report Share Posted November 10, 2018 There is not a top plate. There is a pin from the passenger side. But it is pretty much flush with the shifter housing. It does not have a screwdriver slot or any thing on it. Quote Link to comment Share on other sites More sharing options...
HotRodTractor Posted November 10, 2018 Report Share Posted November 10, 2018 2 Quote Link to comment Share on other sites More sharing options...
Gaige Posted November 10, 2018 Author Report Share Posted November 10, 2018 Thanks for the parts blow up picture. I am not at home currently, but I am going to re-check for top plate bolts. My son in law and I sure didn’t see any earlier. Thank you. Quote Link to comment Share on other sites More sharing options...
Dodgeb4ya Posted November 10, 2018 Report Share Posted November 10, 2018 You cannot just pull the shift lever out. You need to remove the complete top cover with the shifter rod attached. The shifter lever is removed from beneath the shifter cover if need be. 1 Quote Link to comment Share on other sites More sharing options...
Gaige Posted November 11, 2018 Author Report Share Posted November 11, 2018 Thank you Zen Master ,,!,! After digging through all the crud, I was able to find the bolts. They came right off and I proceeded to take the engine and transmission out altogether in 1piece. This is a dually stake body truck that had sit since 1978 in a Kansas barn. My 15 year old grandson (Gaige) bought it for a dollar and trailered it to Ohio with his dad. But his interest seems to fade in and out to work on it. By far, I have never done a project like this before, so, I will have plenty of questions. I hope you all don’t mind. Thanks again. Quote Link to comment Share on other sites More sharing options...
Gaige Posted November 11, 2018 Author Report Share Posted November 11, 2018 3 Quote Link to comment Share on other sites More sharing options...
HotRodTractor Posted November 11, 2018 Report Share Posted November 11, 2018 1 hour ago, Gaige said: Thank you Zen Master ,,!,! After digging through all the crud, I was able to find the bolts. They came right off and I proceeded to take the engine and transmission out altogether in 1piece. This is a dually stake body truck that had sit since 1978 in a Kansas barn. My 15 year old grandson (Gaige) bought it for a dollar and trailered it to Ohio with his dad. But his interest seems to fade in and out to work on it. By far, I have never done a project like this before, so, I will have plenty of questions. I hope you all don’t mind. Thanks again. Where are you at in Ohio? Quote Link to comment Share on other sites More sharing options...
Gaige Posted November 11, 2018 Author Report Share Posted November 11, 2018 Ravenna.—- Northeastern Quote Link to comment Share on other sites More sharing options...
JBNeal Posted November 11, 2018 Report Share Posted November 11, 2018 I spy a Plymouth exhaust manifold...to save ya some headaches down the road, be sure to verify the engine particulars so you get the right gaskets, seals, etc. Quote Link to comment Share on other sites More sharing options...
HotRodTractor Posted November 12, 2018 Report Share Posted November 12, 2018 22 hours ago, Gaige said: Ravenna.—- Northeastern Yep that is a pretty good distance from my place - but my girlfriend's parents are in West Salem right by Dragway 42 and I make it to Hartville Hardware once in a while. 1 Quote Link to comment Share on other sites More sharing options...
Mike36 Posted November 12, 2018 Report Share Posted November 12, 2018 On 11/10/2018 at 7:17 PM, Gaige said: Thank you Zen Master ,,!,! After digging through all the crud, I was able to find the bolts. They came right off and I proceeded to take the engine and transmission out altogether in 1piece. This is a dually stake body truck that had sit since 1978 in a Kansas barn. My 15 year old grandson (Gaige) bought it for a dollar and trailered it to Ohio with his dad. But his interest seems to fade in and out to work on it. By far, I have never done a project like this before, so, I will have plenty of questions. I hope you all don’t mind. Thanks again. Welcome, you are in the right place to ask questions. There is a lot of knowledgeable help here. Quote Link to comment Share on other sites More sharing options...
Young Ed Posted November 13, 2018 Report Share Posted November 13, 2018 On 11/11/2018 at 8:06 AM, JBNeal said: I spy a Plymouth exhaust manifold...to save ya some headaches down the road, be sure to verify the engine particulars so you get the right gaskets, seals, etc. ??? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.