C.C. Rider Posted June 6, 2018 Report Share Posted June 6, 2018 looking for a alignment tool for a b1d-126 10" clutch assembly. in the book i have it says its tool number G-Tool C-360. Thanks Quote Link to comment Share on other sites More sharing options...
DJ194950 Posted June 6, 2018 Report Share Posted June 6, 2018 (edited) 2 hours ago, C.C. Rider said: looking for a alignment tool for a b1d-126 10" clutch assembly. in the book i have it says its tool number G-Tool C-360. Thanks Maybe one of these from oldmoparts.com. Cars maybe too small, not sure -call? Or try a call,search of : https://www.vintagepowerwagons.com/ See attached screen shot of oldmarparts web page. DJ Edited June 6, 2018 by DJ194950 Add vpw mention. Quote Link to comment Share on other sites More sharing options...
desoto1939 Posted June 6, 2018 Report Share Posted June 6, 2018 If you can get a 1 inch with ten splies plastic clutch tool at a napa store then this will align the clutch place becasue you have a 1 inch hole with 10 splines on the clutch plate. Rich Hartung desoto1939 I have this toolc360, but the plastic tool will work just fine. Quote Link to comment Share on other sites More sharing options...
Don Coatney Posted June 7, 2018 Report Share Posted June 7, 2018 Rich, I believe the pilot bushing is 3/4" not one inch. 1 Quote Link to comment Share on other sites More sharing options...
desoto1939 Posted June 8, 2018 Report Share Posted June 8, 2018 Hey Don you might be right about the pilot bushing diameter. The numbers that I gave him was for the splines onthe clutch plate hole and splines. Rich hartung Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.