mrbobs48 Posted April 27, 2018 Report Share Posted April 27, 2018 Is there a special washer that goes in the front rod turnbuckle hole. Mine looks oval and when adjusting the pedal, the rod moves for an aft when pedal is pushed before the dog bone moves?? Quote Link to comment Share on other sites More sharing options...
Don Coatney Posted April 28, 2018 Report Share Posted April 28, 2018 Replace the worn pins, weld up the holes in the dog bone and re-drill to the correct size. Quote Link to comment Share on other sites More sharing options...
mrbobs48 Posted April 28, 2018 Author Report Share Posted April 28, 2018 (edited) Thanks Dan , where do I get new pins. Edited April 28, 2018 by mrbobs48 Quote Link to comment Share on other sites More sharing options...
Don Coatney Posted April 28, 2018 Report Share Posted April 28, 2018 I am not sure who Dan is but I would look for replacement pins at McMaster Carr. Quote Link to comment Share on other sites More sharing options...
mrbobs48 Posted April 28, 2018 Author Report Share Posted April 28, 2018 Sorry Don didn't have my coffee first. lol Quote Link to comment Share on other sites More sharing options...
Plymouthy Adams Posted April 28, 2018 Report Share Posted April 28, 2018 most hardware stores have these in various diameter and lengths for you to pick and choose from....they are usually a grade 5 or better also...remember, you can get longer ones, cut to the length you need and drill a hole for the cotter with a drill press...a piece of angle iron makes a decent v block if needed. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.