1949 Wraith Posted September 1, 2017 Report Share Posted September 1, 2017 I think it's time for new clutch and pressure plate for my 1938 Canadian Dodge D10. The car has an1951 P24 218 engine and running the original 1938 3 speed floor shift. It looks like US models all used the same 9.25" clutch for this era. Do the Canadian models use the same clutch and transmission input splines? I would like to pre order the parts if possible, and do the job at one time. Quote Link to comment Share on other sites More sharing options...
1949 Wraith Posted September 2, 2017 Author Report Share Posted September 2, 2017 I measured the splines on my spare transmission, it measures approximately 1.009 inches and has ten splines. This seem like the USA models? Quote Link to comment Share on other sites More sharing options...
Los_Control Posted September 2, 2017 Report Share Posted September 2, 2017 Sure seems like it would be the american version. Was after 1938 that Canada went to the 25" Canadian motors, so they used American up until then? So just thinking out loud, you have the American 23.5" engine, would use the same clutch/transmission. I guess the only way to be 100% sure, would be to take the old one out first, before ordering new. Sure someone else will have a better answer. Quote Link to comment Share on other sites More sharing options...
dpollo Posted September 2, 2017 Report Share Posted September 2, 2017 You will find it the same up to 1956. Quote Link to comment Share on other sites More sharing options...
1949 Wraith Posted September 3, 2017 Author Report Share Posted September 3, 2017 12 hours ago, dpollo said: You will find it the same up to 1956. Thank you. I was a bit concerned as my Mopar Streamliner listed a fair number different part numbers for the disk and pressure plate assembly. Quote Link to comment Share on other sites More sharing options...
dpollo Posted September 3, 2017 Report Share Posted September 3, 2017 There are a number of different parts but they are interchangeable as complete units. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.