Uncle-Pekka Posted August 7, 2017 Report Share Posted August 7, 2017 It's been years I opened the brake drum, thus I cannot recall the dimensions in detail. The question is; Are the front wheel upper and lower cylinder diameters the same? (thus the rubber sealings would be the same size) See the below "RockAuto" catalog; E.g. WK112 kit would fit "front upper" and rear wheel cylinder, but not "front lower"...? I see front lower has some extra metal pins, but those have much longer life time than the rubber. Thus the question is; If I simply keep 2-3 sets of Dorman 12222 or Raybestos WK112 in by garage drawer, am I equipped to service whichever wheel in my D24? Thanks, Uncle-Pekka Quote Link to comment Share on other sites More sharing options...
Uncle-Pekka Posted August 7, 2017 Author Report Share Posted August 7, 2017 (edited) It's been years I opened the brake drum, thus I cannot recall the dimensions in detail. The question is; Are the front wheel upper and lower cylinder diameters the same? (thus the rubber sealings would be the same size) See the below "RockAuto" catalog; E.g. WK112 kit would fit "front upper" and rear wheel cylinder, but not "front lower"...? I see front lower has some extra metal pins, but those have much longer life time than the rubber. Thus the question is; If I simply keep 2-3 sets of Dorman 12222 or Raybestos WK112 in by garage drawer, am I equipped to service whichever wheel in my D24? Thanks, Uncle-Pekka Edited August 7, 2017 by Uncle-Pekka Quote Link to comment Share on other sites More sharing options...
Plymouthy Adams Posted August 7, 2017 Report Share Posted August 7, 2017 first off, unless you have the 7 passenger you brakes should be 11" and not 12......per my motors manual your cylinder size is same all aps..1 1/8 Quote Link to comment Share on other sites More sharing options...
Uncle-Pekka Posted August 7, 2017 Author Report Share Posted August 7, 2017 Thanks Tim, Yes, mine is the common 4D sedan, thus 11" drums. Now that I take a closer look, the Dorman 12222 says bore 1 1/8, all other say 12" drum, thus the first one would fit all my wheel cylinders. Thanks again, Pekka Quote Link to comment Share on other sites More sharing options...
Plymouthy Adams Posted August 7, 2017 Report Share Posted August 7, 2017 Look again...the front lowers does not show a hole in the piston for centric location of the seal.....springs are different....upper and rear appear to be same kits...three kits combined for upper front and rear ...one kit for the front lower...at least that is how I read the crime scene Quote Link to comment Share on other sites More sharing options...
Uncle-Pekka Posted August 9, 2017 Author Report Share Posted August 9, 2017 After searching the cabinets I found my parts book. Looks like there's only one part number for the piston and piston seal, the cylinder end boot as well. Thus the conclusion would be the rubber sealings must be the same for all rear, front upper & lower cylinders, see below page... Quote Link to comment Share on other sites More sharing options...
Plymouthy Adams Posted August 9, 2017 Report Share Posted August 9, 2017 (edited) yes D24 per my book also..the Rock Auto page list lower as non center hole cup as does about every listing for the WK201 kit on e-bay....rule of thumb here....replace what you have with like kind..... 8 CUPS THE SAME 8 PISTONS THE SAME 4 FRONT SPRINGS 2 REAR SPRINGS Edited August 9, 2017 by Plymouthy Adams Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.