James_Douglas Posted February 14, 2015 Report Share Posted February 14, 2015 (edited) I have rad the manual and the parts book and the thread on the forum... Does anyone have the factory specification for the bore size of the tappet's? Silly that it lists the oversize tappets but no place I can see it shows the bore size when new? I have some differences in the bores and I don't want to pay the overpriced extortion for oversized tappets. I may just bronze sleeve the bores, but I need the original size. Thanks, James Edited February 14, 2015 by James_Douglas Quote Link to comment Share on other sites More sharing options...
James_Douglas Posted February 14, 2015 Author Report Share Posted February 14, 2015 Well, I kept digging and found out the bore size was 0.6220 from the factory. Mine is 0.6240 but the bores could use a good polishing and that will open them up .001 to .002 at least. If I hunt around perhaps I can find some oversized lifters at a "reasonable" price. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.