Red and Green Color Coded Tie Rods

[swaluda1]

Which is Which, upper Red Lower Green or Vise Versa, Also got my Springs in, is the White Marked Side going up or down, Just Don't Know, Thanks, Stan

Edited October 16, 2014 by swaluda1

[swaluda1]

Which is Upper, Also New Springs have White Mark on One Side, I presume that's the Bottom, Just Don't Know, Stan

[_shel_ny]

The seller should be able to provide that information for you. Hard for anyone here to tell you without seeing, and maybe still hard.

[_shel_ny]

Don't understand your upper/lower  question. Tie rods are inner/outer, left/right. Seller should be able to provide position information. If you have #'s, someone here may be of help. Source you obtained from generally does not provide the original packaging. They need to keep their sources confidential.

[T120]

...Port - Starboard?

[BigDaddyO]

Merlot - Zinfandel?

[desoto1939]

1950 Plymouth tierods

 

right rod ends  ES60 r   ES60 L

Left rods ES131 r  ES 131L

 

Outer ends ES166R  ES166r

 

Rich Hartung

Desoto1939@aol.com

[deathbound]

Don't understand your upper/lower  question. Tie rods are inner/outer, left/right. Seller should be able to provide position information. If you have #'s, someone here may be of help. Source you obtained from generally does not provide the original packaging. They need to keep their sources confidential.

 

China.......now the cats outa the bag.

[Andydodge]

The front coil springs should have a ground or tapered edge that fits into the upper spring pocket on the chassis whereas the lower end of the coil spring will sit into the pressed steel pocket riveted to the lower A arm, its not "tapered" like the upper end......replacement and/or lowered coils should have been made with the same "ends" as a stock set.........at least this is what I've seen in the mopar front ends I've played with........andyd.

[swaluda1]

Called Bierbaum, They said 2 tie rods are left hand thread and 2 are right hand thread, beside that, they are the same. Replace each with their respected thread and its a go. Springs are white mark Down. Good info for future use to somebody. Have a good day, Stan