rustrunner Posted February 22, 2014 Report Posted February 22, 2014 Need to replace the Rear oil Seals before I go back together with the new brakes, and all on the B-4-KA restore, and cannot find a number for the seal. Is what I would call the inner Hub oil seal that seals the hub to the rear axle. Have looked at all the Dodge info I have, and even the blowup of the rear axle does not list this seal. Have gone through NAPA, and O'Rileys and neither of them can match it up. Seal is 5 1/8" OD, 4" ID, and 5/8" thick. Does anyone have a # that I could xref to get a seal. Again, thanks for all the help - Dan Quote
Dodgeb4ya Posted February 22, 2014 Report Posted February 22, 2014 (edited) #1196233 is the factory DT part number for all "K" series 2-1/2 ton rear inner brake drum seals. 1948-53. Bob Edited February 23, 2014 by Dodgeb4ya Quote
TodFitch Posted February 22, 2014 Report Posted February 22, 2014 #1196233 is the factory DT part number for all "K" series 2-1/2 ton rear inner brake drum seals. 1948-53. Bob NapaOnline crosses that Chrysler number to NOS 38709. Quote
rustrunner Posted February 24, 2014 Author Report Posted February 24, 2014 Thanks again, this restore has been a real challenge, and this site has been so much help. Will see if I can get 2, hope to have a rolling frame this week, so I can start putting this truck back together. Dan Quote
desoto1939 Posted February 25, 2014 Report Posted February 25, 2014 I checked my Victor x ref and the Chrysler number crosses to Victor 49909 rich Hartung desoto1939@aol.com Quote
rustrunner Posted February 27, 2014 Author Report Posted February 27, 2014 Thanks all, got my seals. Now if just didn't have so much work to do for our Church, could get a rolling frame going - Oh well, next week. Quote
MBF Posted April 9, 2014 Report Posted April 9, 2014 Rustrunner: Did that seal work out for you? I just ordered one through NAPA for my B2JA. I'm hoping this works cuz there aren't a lot of other options through them. Mike Quote
rustrunner Posted April 10, 2014 Author Report Posted April 10, 2014 Mike: When I took all the numbers to O'Rileys we ended up with a couple of possible National Seal Numbers. We ordered both Seals, and National Seal 455547 was the correct one for my B-4 -KA. Dan Quote
Dodgeb4ya Posted April 10, 2014 Report Posted April 10, 2014 The K series uses a larger rear axle and requires a bigger seal than the JA series 2 speed trucks. Quote
rustrunner Posted June 3, 2014 Author Report Posted June 3, 2014 Back again on seal issues. Decided to replace the grease seals on the front hubs of the 53 B-4-KA, and after removing, no # on seal, and cannot find a #. Anyone have a starting point for me? ALSO - Is there a parts manual for this truck that I need to pick up to answer a lot of my questions? Again, Thanks all. Quote
Merle Coggins Posted June 3, 2014 Report Posted June 3, 2014 Here's a link to the parts catalog on the DEPTCA site. http://dodgepilothouseclub.org/know/ph_parts/pilothouse.htm Find your part number and then go to Napaonline and enter it into the part number search and click "Interchange". Quote
rustrunner Posted June 4, 2014 Author Report Posted June 4, 2014 Thanks Merie - followed your directions, and it worked great. Seal # NOS 24459 Dan Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.