John-T-53 Posted March 1 Report Posted March 1 You're gonna have to add metal cabinets to your casework offerings after all this experience with sheet metal.... 1 Quote
ggdad1951 Posted March 8 Author Report Posted March 8 inner fenders continue to be more work than I had in my mind.... 1 Quote
ggdad1951 Posted March 10 Author Report Posted March 10 Another day...and another day not done. But I am closer. I just need to add a stop under the cab, build out a front bumper point, finish trimming up stuff, decide welding method where I grafted in cab corners, and add bumper holes. I did add another connection point up front. Hoping the driver side isn't 1.5 weeks like this has been. Quote
John-T-53 Posted March 11 Report Posted March 11 Are the inner fenders going to be attached to and tilt with the front clip? Quote
ggdad1951 Posted March 11 Author Report Posted March 11 4 hours ago, John-T-53 said: Are the inner fenders going to be attached to and tilt with the front clip? No, they stay with the frame. 1 Quote
ggdad1951 Posted March 21 Author Report Posted March 21 Driver inner fender done, passenger pod fill panel in and hood ornament holes drilled. 2 Quote
ggdad1951 Posted March 29 Author Report Posted March 29 Shift/TC boot mountings and radio hole and mounting brackets. Quote
ggdad1951 Posted June 5 Author Report Posted June 5 After getting my 90° down fitting decided I needed a tich more room for potential heat issues....and the results: 4 Quote
Plymouthy Adams Posted June 5 Report Posted June 5 Good to see others taking time to contour in and weld up the panels for custom fit on modifications.....so tired of just holes in inner fenders or the sledge hammer look...👍 2 Quote
ggdad1951 Posted August 30 Author Report Posted August 30 punching holes in the firewall and building running board mounts....and modifying acc pedals 1 Quote
ggdad1951 Posted August 31 Author Report Posted August 31 Mounted the running board mounts yesterday, but removable until cab goes for paint. 2 Quote
John-T-53 Posted September 7 Report Posted September 7 On 8/31/2024 at 2:29 PM, ggdad1951 said: Mounted the running board mounts yesterday, but removable until cab goes for paint. That should help the cat to get up more easily into the cab too.... 1 1 Quote
ggdad1951 Posted September 18 Author Report Posted September 18 Spent more time with the parts yesterday, a few cut off wheels and a few scary moments with large pieces by myself....I've secioned it into 4 pieces now, but have decided to just build a new one, these parts are just too beat up to match up to a nice clean cab and frame. So off to CoreMark I go to spend unplanned $$. 1 Quote
ggdad1951 Posted September 24 Author Report Posted September 24 broke the bed down to these 4 parts...which will be the beginning of the new bed...gotta start with something! 1 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.