Jump to content

Recommended Posts

Posted

A few years ago when I started my search for a P15, I came across this set of build-it-yourself plans on ebay as published by Science & Mechanics Magazine. It clearly shows a late 46-48 P15 towing their version of a "Trail Scout" camper. So I decided, what the heck, bid and won the auction for short money. I was wondering if anyone has any expirience towing a camper with a P15? It appears from the image that they only used a bumper mounted hitch, unlike the common frame mount we see today on modern rides. I'm guessing from the construction methods on the plan that this camper would have weighed in at close to a thousand pounds dry with probably a tongue weight of close to 300 pounds. Interested to hear more about this subject. Someday I may just undertake this little project...

post-7609-13585359885393_thumb.jpg

post-7609-13585359888938_thumb.jpg

Posted

DSC03401.jpg

I have not tried out my trailer yet on the open road but I did install some helper spring support after this picture and it should help. I only plan to show my car oft with the trailer and not camping! Camping is made for my big toy!

http://s2.photobucket.com/albums/y4/1942dodge/Rebel%20Bird/Rebel%20Bird%20Custom%20Motor%20Home/?action=view&current=ec8eab96.pbw

Posted

Great looking rig in the photo and the Wanderlodge in the link is awesome too. Back in the day that was the best money could buy and it shows with so many still on the road today. Spent plenty of time in one of those Aljo's as a kid. Tease my parents to this day that they could sleep 10 people in that little rig as compared to the 39 foot 5th wheel they drag around today that sleeps a convenient 2 people! (ie: no grand kids) Love to see a close up photo of your bumper hitch some day. Happy motoring/camping! -M

Posted

making an underneath hitch is kind of easy...look it up about 1-2 years ago in the search section. pics and all. start with a regular hitch used from salvage and cut off the ends and weld on new ones and go. i doubt if you are 300 lbs tongue...maybe 100. you can add ballast to rear of trailer as needed to curb tongue wgt.

bill

Posted
Pulling isnt the problem Stopping is

I added a electric brake controller for the stopping. It is not hard and you do not have to rewire the whole car. The only problem is normally you have to have 12V. It really helps with the stopping, those disk brakes only go so far. I think a trailer with out brakes only requires that you buy the brake stuff. I should just bolt on to the axle stubs.

kai

Posted

Towing a small camping trailer behind a '30-40-50's vehicle was a very common affair when those vehicles were the everyday vehicles. In most cases the rear bumper had to be reinforced to hold the hitch and overload/helper springs were added.

The Tear-Drop type of trailer was very popular during the late 1930's, early '40's, my father pulled one behind his '40 Chevy on trips from Los Angeles to Nevada and Idaho before WWII started.

The modern type "receiver hitches" are much better than the old bumper hitches. Several of my friends have receiver hitches on their old cars, some as old as 1930 Model A's.

You have to be very careful with tongue weight, if the TW is to low the trailer will "fishtail" all over the place, possibly putting the tow vehicle off of the road.. If the TW is to high the tow vehicle will be dragging it's tail which will take load from the front tires causing poor steering control. Ideally the weight will be even so everything, trailer and tow vehicle will be in a straight line.

The attached photo was taken in 1940 at one of our family camping trips to Idaho. The vehicle towing the Tear-Drop is my dads '40 Chevy the other cars are my uncles '38 Dodge and '39 Plymouth.

Note.. If you click on the pix you can enlarge it.

post-6666-13585359948248_thumb.jpg

Posted
DSC03401.jpg

I have not tried out my trailer yet on the open road but I did install some helper spring support after this picture and it should help. I only plan to show my car oft with the trailer and not camping! Camping is made for my big toy!

http://s2.photobucket.com/albums/y4/1942dodge/Rebel%20Bird/Rebel%20Bird%20Custom%20Motor%20Home/?action=view&current=ec8eab96.pbw

That's cool! I would love to build one of these for my Windsor. Your Bluebird is my dream coach! Someday I will have one but for now I live with my 82 Vogue.

post-7595-13585359950392_thumb.jpg

Posted
A few years ago when I started my search for a P15, I came across this set of build-it-yourself plans on ebay as published by Science & Mechanics Magazine. It clearly shows a late 46-48 P15 towing their version of a "Trail Scout" camper. So I decided, what the heck, bid and won the auction for short money. I was wondering if anyone has any expirience towing a camper with a P15? It appears from the image that they only used a bumper mounted hitch, unlike the common frame mount we see today on modern rides. I'm guessing from the construction methods on the plan that this camper would have weighed in at close to a thousand pounds dry with probably a tongue weight of close to 300 pounds. Interested to hear more about this subject. Someday I may just undertake this little project...

[ATTACH]24799[/ATTACH][ATTACH]24798[/ATTACH]

Those are neat palns! Any chance you could reproduce them? I would love to have a set for a future project.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.

Terms of Use