Jump to content

Recommended Posts

Posted

My passenger side window has cracks, bought the replacement pane, how difficult is the removal process? D-24CC.

I have my service manual, so the procedure is understood, what tricks of the trade are there that the manual doesn't state?

Posted

just a matter of rremoving the glass from the door...seperate the forward guide from the lower track..set the new glass with setting tape to the forward guide..then attach to the lower guide..the lower guide will more than not be in need of a tad of clean up..possibly sandblast..if not able to sandblast..remove most scale you can..thin protective/preserving coat of POR 15 as an aide to using the setting tape...light coat of mineral oil will act as a lubricant, also activitates the setting properties of the tape..let set so the mineral spirits will completely evaporate, will not take long to dry....if you are not replacing the vent seal..protect it with some tape while you are working everything..take care and prtect the upright's trip cap from damage..those rollers on the track are a pain in the butt. careful here also as the old spring like to snap capow..I know of no source for these..

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.

Terms of Use