one-shot

This car is a late 37. (By pics) In the middle of the production year they went to safety knobs (recessed in Pics) ) Lots of specs/part numbers changed and not all at once at the same production plants. Have to bounce serial number on door frame against production numbers,P3 or P4. I see open (Late) leaf springs vice cloth/metal wrapped. Licence plate light is dodge? Most old/original titles were done by engine serial number. Both P3/4 bodies had a motor serial number starting with a P4.

The PC 599690 is the primed one. Perfect size match except one is spot weld bottom and other has rivets. Came with standard 3644 lens om both. Prime does not have trim ring to hold glass. Harold

I have two OEM headlight buckets in original Mopar boxes. PC 914288 LH. It is complete unit, Glass (3644) small trim ring, bulbs wiring harness and color black. designed to vertical mount. I have a second one that is primed in box PC 599690, glass (3644) no trim ring, bulbs, wiring harness. but the base is riveted on vice spot weld. It has a date of May 20, 1941 on reflector. Both are 7-1/2 deep and with lens opening of 7-1/2. I suspect trucks 36 and 39. They are duplicates except for rivets vice spot weld. Any help please. They need a home. Thanks Harold

First many thanks. Now I know where it came from. Many years ago I pulled the rear end and drive shaft from a 39 dodge for parts. Must have got the trans also. I have several spare trans, so I will put it up for adoption. Thanks again Harold

I was hoping its an overdrive. I will bring home and clean up. And then pull the top. Ive gathered a lot of too good to pass up stuff. Harold

I think its Mopar, not sure where I acquired it. What year? Single shift leaver? Cant find it in my books. Harold