Probey53
-
Posts
23 -
Joined
-
Last visited
Content Type
Links Directory
Profiles
Articles
Forums
Downloads
Store
Gallery
Blogs
Events
Classifieds
Everything posted by Probey53
-
Was wondering if anyone has put a stant 6 dodge engine in a 1953 dodge pickup or around the year ?
-
Does anyone have any numbers or where i can find them , front leaf spring bushings on a 53 Dodge b-4-b.
-
Does anyone have a master cylinder with the 3 bolt pattern off of a 53 pickup that they could take the measurements of the bolt pattern so i can make a bracket to switch to a dual master ?
-
Does anyone have any dimensions of the bracket to change to a Cherokee master or corvette one ? Any pictures will help to .
-
Has anyone put on Rusty hopes brake kit on a 53 pickup if so any pics and if the bracket is on the outside of the spindle or on the inside ?
-
Having a problem getting my steering wheel off any help took nut off tried pulling on it but will not come off ?
-
Maybe down the road changing the engine out , for now looking into moving it to the fire wall or up grading the master . I heard something about a master from a Jeep Cherokee or maybe you have a better idea?
-
Has anyone moved there master to the fire wall and if so what did you use ? Or am i better off to change the master cylinder to a dual one if it will fit , Jeep Cherokee ? 53 dodge pickup 1/2 ton.
-
Anyone put a slant 6 in a 48 to 53 dodge pickup ?
-
Is there any other engine that will bolt up to a flat head 6 trany in a 53 dodge pickup ?
-
What do you mean ?
-
Wondering what years to use and what Dakota to use , regular cab or ext cab , long box or short ? Frame swap on a 53 pickup
-
My fuel pump is leaking out of the screw on the bottom , The screw is striped out so I am looking for a fuel pump number or a fuel pump any help ?
-
It seems to be getting a good squirt from the acc pump there is an extra white mark on the damper so i will look into that . I will take #1 plug out and find tdc and find out where its at .
-
I rebuilt the carb , checked timing adjusted to 4 degrees , vacuum advance work in good . Pops back through the carb if you really get on it . Any suggestions .
-
I rebuilt the carb , checked the timing its at 4 degrees before , the vacuum advance is working good , wants to pop back through the carb when you try to accelerate . Any suggestions ?
-
Can the temp gauge be calibrated mine runs at 212 all the time but don't seem to over heat .
-
12 volt convention with a dodge alternator
Probey53 replied to Probey53's topic in Mopar Flathead Truck Forum
I have the old mopar one with the regulater from my old car when I did my engine swap. -
Has anyone converted a 48 to 53 dodge truck from 6 volt to 12 volt with using a older dodge alternator .
-
I am just trying to find out what car or truck clutch brake assembly would work for what i am trying to do , my clutch pedal is vary loose and the brake pedal bushing is bad to that's why i am thinking of moving them to the fire wall .
-
What was the car that you put it in to ? Any pics
-
Anyone move the clutch and brake pedals from the floor to the fire wall on a 53 pickup . If so what was used .
-
Hi new to the forum . Has anyone put window channel in a 53 dodge pickup ? And how to install the clips that hold the channel in ? Need help on how to post ?