P15-D24

Advance till it pings, then back off a couple degrees.

What browser are you using? Win/Mac, IE, Firefox, Chrome Safari The ad placement has been the same for at least three years if not longer.

It's just providing additional info for you public profile. It is very helpful for others addressing your question as they can see what project your working on and if anyone is near you to help. If you don't want to disclose the info just put in N/A.

If you drag and drop the image to where the paper clip icon and says " Drag files here to attach, or choose files..." it should resize the image automatically.

It's really that easy. Just watch the sharp edges on the backside of the radiator.

Click and hold on the lower right corner and drag it.

Either make your window wider so it formats correctly or make it narrower and it will move below the thread.

It's tough to keep a site going, especially with all the costs that keep growing. Sounds like an opportunity for Rich and Steve to set up club for P18-P23 owners over here!

Just tried it and it is working. Downloaded a file also. Try a different browser.

You still have air in the lines. Either you didn't get it all out or you have a leak/bad wheel cylinder. Don't worry about pedal height (that is show adjustment) until you have a firm pedal.

I'm a believer keeping them stock, but first getting them in top mechanical condition so they are safe on the road. I'm looking forward to input from other club members.

Get more outside cat(s) If the area is confined (other animals can't get in) I use sticky traps. Speaking of annoying (and deadly) critters, anyone have a good way to discourage rattlesnakes? Had a 20" juvenile in my garage last week

Just bundle them up in the garage or put them to work pushing snow?

Many times, he often has odd ball stuff your trying to find. Can be a little grumpy on the phone at times but I've had good luck ordering from him.

When you say canister, you mean the bypass oil filter? Is the feed line hooked up correctly to the oil gallery supply line? Is the supply line correctly plumbed to the inlet side of the oil filter?

All this complaining from the guys who complain when a new member doesn't include any info in their profile like location and project info. Having that info may actually help people get more accurate info faster. It's a one time thing, get over it.

Once you update the profile you won't see the prompt again.

Power wagon 4x4 , 1 ton. Made from '46 to '65, with 230, 250 and 265 engines. Usually seen with a pickup bed. Has a pto so a winch is a common accessory. Also dump bed and power takes off at the back we're available. These are heavy duty, all terrain working trucks that could go just about anywhere.

I don't think it can happen, skip a tooth. You can check valve timing with the marks on the vibration damper. Pull the front valve cover and watch when the intake and exhaust valve opens.Their are factor specs for this degree location and you can verify with the pointer location on the vibration damper.

Tough old lady, still floating! As a lifelong sailor I feel your pain.

I'm sure it has been done, just maybe no members have. Need to change to 12 volt , neg. ground. If your going to go engine driven have to come up with a pulley set up, probably a dual crank pulley and figuring out which side mount the compressor. With the option of using an electric compressor instead of engine drive, installation is even simpler. Probably need to update to a higher amperage alternator but that looks like a good option for the vintage air kits.

Works just like a forum thread but specific to this club group. Have fun!

I've always gotten that prompt

Emoticon are tiny files and usually are cached locally once used. Actually I like the reminder for fill out the profile as it answers a lot of questions for the first post made by a new member. like location and what are you working on. Yes they are doing some social features, but as always they are optional. You have to remember their is a growing number of new members who use those mediums and are comfortable with them. It like adding tablet and smart phone access, just expands the user base. Regarding dislikes, we had the down arrows but everyone complained so I got rid of them. I will check and see if third part add ons are available for your request.

I'll be setting up some of the new "clubs" as soon as I have time to review the documentation. Let me know if you run into any new issues.