Jump to content

Dodge1996

Members
  • Posts

    8
  • Joined

  • Last visited

Reputation

10 Good

Contact Methods

  • Biography
    "Dodge Life"
  • Occupation
    Almost retired.

Converted

  • Location
    Mississippi, on the beach
  • Interests
    Camping, cars and fishing

Recent Profile Visitors

The recent visitors block is disabled and is not being shown to other users.

  1. I got the clutch free and was happy so I pulled it out of my shop. All good until it stopped. Now I cant get it into no gear. Does the silenond or governor have anything to do with that. I can put the gear shifter up r down with no grinding without pushing the clutch at all.....
  2. I got the 49 chrysler going but now there is no clutch, I jacked it up and cranked it in gear and all is moving fine. But can't get it to crank in gear on the ground. The clutch plate seems to be stuck in gauged. Any ideas with out tearing it down..
  3. OMG after y'all's help I took the starter back off and made sure I had a good ground everywhere. Reinstalled the starter and it worked the motor turned over. No fire to the plugs Until a wire caught fire and burned off coming from the voltage regulator. Then I turned the key to see if it would still turn over and it did. I also heard the coil wire which was hanging there fire so I hooked it up and poured some fuel down the carb and it cranked right up. Thanks for the encouragement to keep me going.....THANKS
  4. Ok I'm still trying to figure this wiring out. I have lights and a horn but no starter yet. How can I test my starter with some jumper cables. My starter have a box on top of it with two small lugs on top and two large lugs on bottom. Thanks for the help ...
  5. This would be my first post on this site and it seem there are a lot of nice people here willing to help. I picked this car up not knowing much about it like reverse polarity and fluid drive trans, but I am learning. I am not a young buck but this car was before my time.. Thanks for all the input it is much appreciated...
  6. I did buy a book and hooked it up to what I think was right but it still won't turn the starter. The wires in the car are old and bare in some spots and I think they r to bad to repair. And the 21 circut is because I was now sure what I needed. Now I know better...thanks for the help so far.
  7. What can I pull out of the car before I start setting in new wire. I picked up the car not running and the wires where not hooked up to the starter. Not sure if it was reverse polarity. I took the starter to Hammetts to have it checked and got it to work but I can't get the silenond to kick in when I think I have it hooked up right. Not sure where the wires go on the starter. There is 4 lugs on the starter. So I guess in need help with where the wires go on the starter and if I can't get it to turn the motor over I will need to replace the wire system with the one I bought from ez wire.thanks for any info......
  8. What can I pull out of the car before I start setting in new wire. I picked up the car not running and the wires where not hooked up to the starter. Not sure if it was reverse polarity. I took the starter to Hammetts to have it checked and got it to work but I can't get the solenoid to kick in when I think I have it hooked up right. Not sure where the wires go on the starter. There is 4 lugs on the starter. So I guess in need help with where the wires go on the starter and if I can't get it to turn the motor over I will need to replace the wire system with the one I bought from ez wire.thanks for any info......
×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.

Terms of Use