Jump to content

veterantechnic

Members
  • Posts

    56
  • Joined

  • Last visited

Everything posted by veterantechnic

  1. Thank you Casper. I will try buy them.
  2. Yes, some more pics would be helpful. Specialy from the area where it is atached to the doorpanel
  3. Hello, I still haven't found the armrests yet. I am hoping some of you can help me with this. If you could post here some pictures and information of measurements, I could make them on my own.
  4. Hello, I am looking for arm rests and I found this http://www.robertsmotorparts.com/store/arm-rest-brown-replacement-style-dodge-truck-plymouth-truck-fargo-truck-1934-1953-1-1-1-1 Can they be the same or are they different for my car? Can you guys post here some detaild pictures of original arm rests?
  5. About green colour. There was only one place with good original paint. It was inner side of the name plate. The right tone we got by "hand craft". We did not find chance to make right tone by modern colour code. I hope I can have the code of these paint by the Standox.
  6. Yes, you are right, Dale. These stainless strips are really hard and does not allow the bending. Especially in front by the smaller radius. I think I will replace these to soft fender felt.
  7. Hello Gentlemen. I hope again in your help. I need door inside upholstery panels. At first I would be thankful for pictures about the panels. Did they change the shape during 1946-1948? Thank you. Leevi
  8. Thank you Gentlemen for nice words. Sorry, pflaming, what you mean in your question?
  9. Thank you Cpt.Fred for nice words. Yes it should be connected to the dual heater. But I have only right side heater. It is enough for our climate in the summer time. Left side hole will be just open or shut. I am not sure about it. All the best. Leevi
  10. Hello again. May be really some one have the fresh air adapter for sale. My working process has stopped behind that. Thanks.
  11. Thank you, Yung Ed. I need it. Really, most important part is 1-53-4, but other parts from the list are also needed. Little rust is not big problem. Tell me the prise. Thanks. Leevi
  12. Hello all. This important part of my car is missing totally. I am very thankful for everyone who could help me to fined one. The central part is most wanted. Leevi Naagel
  13. Hello again. The car is painted now. I disassambled the engine. Rather bad condition. It needs oversized cylinders. Crankshaft also needs to be polished into next size. Now I have a question. What are the cranckshaft bearing surfeces standard measures? Would be nice to have in millimeters. Thanks. Leevi Naagel
  14. Hello again. Some pictures added. Now the boby is redy for painting. Bumpers are fitted before rechrom. I tried to looking for the right inside color from Autocolor Library, but still no succsess. Thank you Greg and Niel for help me. The clips of stainless trim are ready. Need only zinc cower. Usually Google translatin give right equivalent for separate words but whole sentence lost idea. I use that also but any time it need correction. Leevi Naagel
  15. Hello guys. Thank you for nice words. Especial thanks for greg g, Mark D, mr. Bill and other guys for shearing information.Now I need to have knowledge about original colour. Like I told former I found some pieces of original gray under the body. So, I ordered new paint by visual.Now I am not very sure any more, have I got right tone. (RAL 7021) To research from the Forum I found that the right tone is Ecosheen gray. It is based more like green, not to blue like RAL 7021.Also I got to know that with Ecosheen gray was covered everything exepted outside surfaces. It means all inside, saloon and trunk, weels arcs front and rear, hood and trunk lid under side. But how about fire wall from engine side?Also side panels of engine compartment? Thanks Sorry, I refresh former post. Should be very gratefull to get some information about the colour. Other question for rocker molding: I plan to use these selfmade clips. But I don`t know right height of the molding. How much it must be lower from the rocker edge? Thank you all Leevi
  16. Like I`ve read, the rocker moldig clips are not available in the new product market. So, I`ve experimented with several type of rocker molding clips. This one seems to be work satisfactory for P-15 rectangular hole 3/8 by 3/4`` The base plate needs a little bit more design. The bolt will be replaced with rivet. Hope, I can produce this type of clips turing the winter if it is adequate need for these. -- Leevi Naagel +372 5669 7085 www.veterantehnika.ee
  17. Hello guys. Thank you for nice words. Especial thanks for greg g, Mark D, mr. Bill and other guys for shearing information.Now I need to have knowledge about original colour. Like I told former I found some pieces of original gray under the body. So, I ordered new paint by visual.Now I am not very sure any more, have I got right tone. (RAL 7021) To research from the Forum I found that the right tone is Ecosheen gray. It is based more like green, not to blue like RAL 7021.Also I got to know that with Ecosheen gray was covered everything exepted outside surfaces. It means all inside, saloon and trunk, weels arcs front and rear, hood and trunk lid under side. But how about fire wall from engine side?Also side panels of engine compartment? Thanks
×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.

Terms of Use