bigred48

My cousin went to school for body work and he was the one that painted it for me, but the rear fenders and hood were painted off of the car. the doors were on the car when they were painted. Andy

Sorry Ed I think that there will be way to much work for me to be ready for a roadtrip of that magnitude. Thanks, the electric green is masking tape that was used to keep from scratching the paint while it was being towed home. Andy

Well it has been over a year since I last posted here, I have been busy with school in the winter and working in the summer. But I was finally able to finish the bodywork on my Plymouth. Now I need to purchase all of the weatherstripping and other rubber parts for the the car. It has been so long since I took this thing apart that I have forgotten how the stainless steel trim is installed. And how the glass sweepers go in. If anybody has any pictures of this it would be greatly appreciated Thanks, Andy

come on now, it has mufflers.

you don't have to remove the bell housing to get the clutch out but you will have to spin the flywheel in order to remove the pressure plate. I turned the flywheel with big screwdriver on the teeth which may not have been the best idea but I did not cause any damage, you could remove the spark plugs and maybe turn it by hand I don't know about that so don't quote me. I did not have to personally do the clutch I just checked it and reinstalled. I would put a new gasket between the housing and the bell housing just as cheap insurance against leaks. I thought it was a really simple repair aside from all the parts that need to be removed. one more thing be sure to get the drive line bolts tight I would suggest some locktite on them just to be sure. Good luck Andy

It is pretty easy to do the clutch in the car I took mine out last winter just to check before I put it back together. Get a clutch alignment tool and you will be good to go! the only tricky part I can see is removing the upper two bolts on the transmission, it wasn't an issue for me because I had the floors out but I am sure there is away around this. Good luck! Andy

Do you have a picture? Sounds like a great cruiser.

Are you going to build a stand? maybe you could locking on casters on the bottom so it would be easy to move out of the way. So now that you have a buffer are you going to fix all the trim from your crash?

This thing looks really neat to me. I wish I could help but I am definitely computer illiterate when it comes to photo shop. did you use the roof and rear door from another car? Looks like it will be very cool.

The only good thing I see about this is that it has a cummins,but other than that YUCK!

Do you slap the door when you want to go faster?

Looks good I'm glad that you like it. I am excited to see my radio it will give me something I can tinker on at school.

so that's where all our water ended up. keep dry Fred I know a bunch of really experienced sandbagging if you need tips.

It is spray foam used to fill in cracks in a house, but this person decided to fill my rocker with it and then use it to support the thin galvanized steel they laid over the top of the holes.

you could always fix it with this http://greatstuff.dow.com/greatstuff/diy/index.htm This is what my rockers were made out of when I bought the car. fixing this kind of rust really isn't that bad just break out the welder and a grinder and away you go. here is what I started with and this is what I ended with Good luck! and have fun.