Jump to content

billwillard

Members
 View Profile  See their activity

  • Posts

    512

  • Joined

  • Last visited

 Content Type 

Everything posted by billwillard

  1. billwillard
    Norm, What is the hose in the center of your intake? Wipers? Bill
  2. billwillard
    You have to dimple them in enough to seat good but do not go to far eather. If you drive them in too hard they will eather leak or pop out. 1/2 flat Bill
  3. billwillard
    ford
  4. billwillard
    Young Ed, I don't remember where I got them as I have had them for years. I had 6 but only have two left and have never seen them any place else. I take it they are factory as they are a mirrow of the left and fit like a glove. The pins can be found at FRd venders. Bill
  5. billwillard
    folder in my computer? I do good to get it turned on and off. Bill
  6. billwillard
    Don you know I don't use no schedule 40. I like me SH__ strong. Greg, I thought the swirl toronado went in the tail pipe. Messed up agin.
  7. billwillard
    :DA few of you keep asking me to show the right hand mirrow arm for 40 - 46 dodge-ply trucks. They are just like the left ones.
  8. billwillard
    Grey Beard, Sorry have been in Va. visting my son. I don't know what I am talking about but to my understanding the spacer will help increase and maintain a higher airspeed and velocity through the intake tract which is good for enhancing low speed torque AND HP in crusing rpm's. This has been dyno tested in two seperate magazine articles and it says HP gain can be as much as 15. I had mine made with a threaded hole in the side so I can run my PVC to this point. Read magazine article at info@marshallsince62.com
  9. billwillard
    Having a bad day are we Captain Neon? Bill
  10. billwillard
    GrayBeard on the truck form roller painted his truck. Looks great
  11. billwillard
    Graybeard, The spacer placed under carb will help with low end tourque. I had the hole in the side threaded so I can run my pcv valve to it.
  12. billwillard
    My wifes 89 olds still has the factory system with 285000 mils. aluminized
  13. billwillard
    I posted this spacer before but had not bought it then. I didn't know it but Scott custom makes any type you need. Just send him a drawing or sample. The type Iam showing here cost $20.00 plus $2.oo shipping, very reasonable I think. www.marshallsince62.com Email info@marshallsince62.com He is in Flinstone,ga, probably learned his trade making wheels for Freds car. Yaba Daba Do. Nice guy to deal with. Bill
  14. billwillard
    new $8.50 a piece 360 574 1082 Just bought 8 of them. Bill
  15. billwillard
    You beat me to it Greg. Work cloths can't be for Rodney unless soft honeydo stuff. Bill
  16. billwillard
    I bought my first car when I was 15 and I am now 72. A 40 DeSota 4dr. Only one guy in town would ride with me and he would always sit in the middle of the back seat and hold on to the two side straps. (WILD CHILD) I can't count the cars I have had in my life but Mopar has always been my favorite. I now have a 35 Dodge cp-50 Plymouth bus cp and 48 Dodge. Hope I live long enough to get the other two on the road.
  17. billwillard
    The first thing to do is get under your truck and see whats wrong.
  18. billwillard
    With the prontronix all you do is remove the points and install inside dis. No added box. Bill
  19. billwillard
    You do not have to go to 12vts. Prontronix part # 1362p6 for 6vts and 1362 for 12vts. 800 556 1365 is a good place to buy. I have used Prontronix for I don't kmow how many years and never had one go bad. bill
  20. billwillard
    prontronix # 1362p6 for 6cyl 6vt pos ground--#1362 for 12vt Drops right in your dis in 30 min. I buy mine from Bob Soucy 800 556 1365 cell 239 671 3974 who has always given me great service.
  21. billwillard
    www.restorationspecialties.com
  22. billwillard
    Don always closes his eyes and Lisa don't get jealous eather.
  23. billwillard
    What trans are you running?
  24. billwillard
    Rodney, You could at least leave me the 40. Your wife will never miss it and when you come back I'll take you for a ride. Bill
  25. billwillard
    Torque to 15 lbs
×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.

Terms of Use