Jump to content

chris 48 P15

Members
 View Profile  See their activity

  • Posts

    121

  • Joined

  • Last visited

  • Days Won

    1

 Content Type 

Everything posted by chris 48 P15

  1. chris 48 P15
    there are different types of threads for these fittings i dont know what size they are parts maybe found at local auto parts store replacement parts for these cars may be in metric threads the fittings are supposed to be leakproof when done properly you may also find this problem with fuel lines
  2. chris 48 P15
    hello nice car to learn on parts are available check local auto part stores as well as specialty auto part stores for parts also use this forum for info have fun
  3. chris 48 P15
    8-34-178screw and 8-34-179 is the nut looks like modern day equivalent may work also the red line gear lube works real well
  4. chris 48 P15
    i bought master cylinder from ab the shaft would not fit ended up rebuilding old one with parts from both master cylinders
  5. chris 48 P15
    i rebuilt fuel pump for 48 p-15 my book calls for pt-6 tool also if you hold the plunger up line up hook you can connect without tool look into hole a little awkward but can be done also pin 14-79-2 is known to slip out the fix uses two c clips hold pin in place
  6. chris 48 P15
    try vintagepowerwagons.com also try moparmall.com happy hunting
  7. chris 48 P15
    gun laws are different in ny dogs make noise lets me know and intruders know this may not be the place to rob after that will be dealt with accordingly
  8. chris 48 P15
    if not yet installed motion lights and noise makers would be a good thing as far as putting it on a trailer you might lose two toys i have dogs i live in suburbs and its noticed if you drive around some citizens in ny state are trying to change some of the gun laws i have seen big i beam set ups in front of some garages the beam is driven into ground and locked has to be removed to use garage one man operation but still looks like pain in the ass to use whatever it takes
  9. chris 48 P15
    starting a night tour typically the outgoing and incoming shifts talk about events there is always coffee, cookies, cakes so this night tour the pickings were slim except for this one shiny chocolate covered finger type cookie naturally that's the one i picked had coffee set up my seat first bight got a mouthful of dirty sponge water yes it was a dirty sponge start of a good night tour
  10. chris 48 P15
    i just bought a shumacher sp 1296 trickle charger does everything automatically 6 or 12 volt only 2 amp very nice don't know if it will work with optima battery there is info on that on the optima website question if i connect to car can i leave battery connected to car or should i disconnect
  11. chris 48 P15
    i use an antifreeze tester and color change method
  12. chris 48 P15
    put gasket glue {indian head, high tack} on water pump side only if it is still apart maybe redo before you put it together and find problem as far as bolts go i don't know haven't done my water pump yet maybe they need sealer on threads
  13. chris 48 P15
    the rubberized cork is usually use on valve covers oil pans thin metal to solid metal the paper would be for solid metal to solid metal also can take more torque before splitting i would say rubberized cork would be better choice if there is warpage
  14. chris 48 P15
    get gasket material and make it the gasket its obsolete i was taught to put gasket glue (high tack) on part that can be removed from engine block easier to clean mating surfaces
  15. chris 48 P15
    RonJ when you replace motor mounts there may need to be some readjusting of shift/tranny linkages i replaced motor mounts there is a difference the new ones are stiffer but no problem there are some threads to this
  16. chris 48 P15
    maybe cause of my clutch chatter
  17. chris 48 P15
    maybe something be wrong with bracket plate 9-65-6
  18. chris 48 P15
    the release bearing is a regular made part part # bca 1505 commonly used on many applications
  19. chris 48 P15
    found this in transmission section plymuth p15 service manual one inch is free play should not be zero pressure as the whole system works on springs i think that free play means difference in pressure when you press the pedal to contact with pressure plate
  20. chris 48 P15
    nice sunny day in ny took out my plymouth first time since i got her parts run to napa
  21. chris 48 P15
    this is from the inside story "the owner's manual" also ynzyesterdaysparts.com has the 6-volt bulb to cross reference they use the mazda number there are many threads to this conversion the people who have done it seem happy makes life easier
  22. chris 48 P15
    this is from a 1946-48 parts book p-15 thinking of doing this conversion also
  23. chris 48 P15
    looks like its 49 you should by parts book and repair manual the parts book has useful pict and info there are plenty of places to get them online happy wrenching
  24. chris 48 P15
    im a fan of cranking the engine over before starting gets all the juices flowing thinking oil in passages and bearing surfaces i dont always remove the spark plugs but if engine has sat for a while i will let it crank over before letting it run
  25. chris 48 P15
    there are options for the main seal original is rope there are threads to this repair
×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.

Terms of Use