Jump to content

Frank Ollian

Members
 View Profile  See their activity

  • Posts

    134

  • Joined

  • Last visited

 Content Type 

Everything posted by Frank Ollian

  1. Frank Ollian
    There are a couple fronts on e-bay now. I think this seller recently parted out a couple one tons, you might check to see if they have rears.
  2. Frank Ollian
    Could be the combinaton of light playing tricks and an old, grainy two deminsional photo.
  3. Frank Ollian
    Early 58, four headelights were not legal everywhere until sometime in 58.
  4. Frank Ollian
    With the way these funtion can you now lock the drivers door from the outside?
  5. Frank Ollian
    Looks like a decent workaround, you can always find originals later if you decide to go the show truck route.
  6. Frank Ollian
    That was the limited edition special optional hood ornament. It was expensive and hard to come by so it is seldom seen today.
  7. Frank Ollian
    What is your battery tray off of? Looks like a good substitute for the original. Got a part number? Thanks.
  8. Frank Ollian
    Truck-O-Matic is different
  9. Frank Ollian
    Are those Stockton wheels coined for use as duals?
  10. Frank Ollian
    If you really want a poly you might consider using a later 318A after 62, they have many parts compatible to the later 318LA.
  11. Frank Ollian
    Now thats a real Pilothouse.
  12. Frank Ollian
    Be careful on this purchase. The roads in Warren are very salty. Cars I drove there as a teenager were like the Flinstones cars, you could look down and see the road go by below you. Look for rust in the normal places and especially under that lower stainless trim and where anything bolts to the body like the rear fenders. The steel around holes will be thin and mostly rust.
  13. Frank Ollian
    I use that product to line the drawers in rollaway tool boxes. I think you will find that 1/8 " thickness to flimsy to use for floor mats.
  14. Frank Ollian
    Two of my favorites. Nice Studebaker and B Model Mack.
  15. Frank Ollian
    Check out the inside rear cover of the current Vintage Truck.
  16. Frank Ollian
    Nice work. Do you have part numbers for the radiator or the hoses used? Thanks.
  17. Frank Ollian
    Enlarged your profile photo, that looks like a 300.
  18. Frank Ollian
    Can't tell from the picture but it looks like those could be budd wheels, that would make your truck a 300. If it is a 300 the procedure is different and no puller is required.
  19. Frank Ollian
    For those who enjoy youtube check out a video titled 1961 The Dead Cars Place
  20. Frank Ollian
    If I remember correctly the Stockton Power wagon wheel is not coined or have enough offset to use as duals, also didn't someone try these and had clearance problems with brake drums. Anyone have these on their truck and can verify these issues. Thanks. Frank
  21. Frank Ollian
    3-M strip caulk.
  22. Frank Ollian
    For those who haven't yet seen it there is a nicely done video on YouTube titled Winchester 75 Sporting Model that has two of my favorite things. Pilothouse trucks and 22 rifles.
  23. Frank Ollian
    Your B1D is a one ton, the light duty Dana 35 is more like a 1/2 ton axle and may look out of place on your one ton.
  24. Frank Ollian
    If you have the 230 crank and rods I think you also need the 230 flywheel, can yours be salvaged?
  25. Frank Ollian
    I had a 55 first series 1/2 ton panel that had 16's. Maybe a switch to 15's for the second series?
×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.

Terms of Use