juanmc87

Any suggestions on how to remove the oil seal that sits in the retainer on the back of the tranny? Its part that leads to the yoke. It's on an NP420. I don't see any identification on the seal, if someone could help with a replacement part # as well I'd appreciate it!

Thank you wallytoo! Plenty of info for me to work with! Much appreciated.

What did you buy for your replacement? I'm starting to think that for the sake of future headaches, going 12v might be best.

I mistakenly posted this in the p15-d24 instead of the truck forum. I'm needing to rebuild my starter, which is an Autolite MCH6103. That's at least what's on the placard, but it's only dangling on by 1 rivet so who knows if that was thrown on after a previous rebuild. My question is, are the starters interchangeable which these engines? Would I be okay using an MCH 6101, MAW4032, MAW4052, or even a newer Wilson? I just can't seem to find much literature on these to look at specs and compatibility.

Thank you, I have it at a shop currently and they're looking into parts. I do plan on keeping it original as possible, so I'd like to keep the foot starter.

I'm needing to rebuild my starter, which is an Autolite MCH6103. That's at least what's on the placard, but it's only dangling on by 1 rivet so who knows if that was thrown on after a previous rebuild. My question is, are the starters interchangeable which these engines? Would I be okay using an MCH 6101, MAW4032, MAW4052, or even a newer Wilson? I just can't seem to find much literature on these to look at specs and compatibility. Thanks in advance!

Appreciate the feedback, I'll try to hammer it out first and get it a new gasket on there.

Sorry if this is a duplicate, I just recently joined but have been trying my best to look thru previous posts and haven't found much. I've seen that Vintage Power Wagons has some options, but is there anywhere else I can look or find a replacement oil pan for a T306 engine? I have a huge dent on mine and would like to get it replaced. Thanks!