Jump to content

Noonan

Members
  • Posts

    38
  • Joined

  • Last visited

Everything posted by Noonan

  1. Thank you for all the replies. This is all really great info. I did manage to solve my issue of relocating 1940 uprights,. upright is the wrong part name. I found the parts when I started inquiring regarding knuckle supports. I've also purchased the entire front suspension system from a 51 DeSoto which I will set aside in case I want to bring the front end into the 50s Thanks again !
  2. This is a great resource to have, thank you! I don't see the 40 Plymouth listed on the front wheel suspension parts index, only the 41-56 Ply.
  3. Thanks Jon, if I'm not mistaken the uprights after 1940 used different connections to the upper A arms, requiring the complete front A arms and uprights to be swapped into a 40 ?
  4. Hi everyone ! I've been trying to locate replacement uprights for my 1940 Plymouth coupe as the last owner hacked them up pretty bad in an attempt to lower the car. So far I've had no luck. To my question: will 1951 DeSoto car A arms (complete front suspension assembly) bolt up to my 1940 Plymouth car ? If this is possible does anyone know if this changes the location of the wheel in relation to the fender opening (going from 1951 front suspension to the 1940 frame) ? Thank you all !
  5. Hey everyone ! Working on my 1940 Plymouth and I'm about to pull down the remainder of the headliner and fabric wrapped door seal . I notice along the brow of the windshield metal - there is a strip secured in place to the steel that appears to be stapled in place to the steel. The forward section of the headliner is then nailed with tiny little nails to this strip. This is all covered with the inner windshield molding. What is this little fibrous strip made of ? Is it wood ? doesn't really seem like wood but I haven't messed with it much yet. There is more of this wood/fibrous strip along the roof above the door opening. Along the door opening it is held in place by tabs. The headliner and door seal is all sandwiched here with little nails and again all of this is covered with a metal inner molding and screws. Again is this strip just wood ? Thanks for the input !
  6. I'm not sure that a stiff mount is going to affect your bell housing mounting that negatively. You might find that a stiffer mount actually improves the feel of the car and the driveline. You may also feel and hear a bit more noise and resonance through the frame and body with stiffer mounts. But who's to say without a bit of real world testing what the actual outcome will be. I think it is a give and take when choosing between soft and hard mounting materials.
  7. Hi Marks this Andy Berbaum site is laid out really well. It definitely shows that 40-48 all use same windshield rubber than the 49-50 uses a different part number windshield gasket. Thank you for the site info
  8. Cool thanks for all the input!!! Yes I build out of an established machine shop. Along with a partner with years of expertise Tig welding aircraft components and running lathes milling machines etc.. shaping metal is not the trouble. The trouble is time in labour vs. are there better grill shells floating around.
  9. It's a pretty rough shell isn't it No stainless trim. I had all the stainless trim lined up with Mr. Lindsay so and so. Altt after I told him I was in Canada he backed out on me.
  10. Hi J ! Thanks for the reply. I am aware that the glass is flat and can be cut. At this point I have a line on an old car with good glass that I might also be purchasing for the power train. So interchangeability is my mission for the time being
  11. I have been hunting for the proper grill shell for my 40 plymouth. The grill shell on my car is not the correct grill shell. I've attached photos, what do you guys think ? Should I buy this and spend the time to repair it ? Do these grill shells come up often ? Thanks !
  12. Hi guys and gals, I'm just doing some research as to what years of windshield glass is interchangeable into my 1940 Plymouth. Can anyone confirm my research that 40-48 windshield glass will all work in the 1940 ? I also came across a one piece windshield assembly, I'm curious to know has anyone seen this one piece glass installed on a Plymouth yet ? Thank you !
  13. Might have to pick your brain if I come across an engine that I'm considering buying if you keep reading books like these !
  14. I actually didn't know that ! Thank you for the heads up. I see you are from Melfort, i drove right through the other day; heading east of Tisdale to check out the 40 Coupe. If you see any Mopar powertrains in your area please let me know !
  15. Hey ! I just bought a 40 Plymouth coupe and joined this forum "saskwatch" on this site sends me a reply and says you probably already know laynrubber he is from LaRonge too ?

    1. Show previous comments  5 more
    2. Noonan

      Noonan

      I have been in LA for the fall/winter.  Will leave again for work in the next couple months.  Make trips back to continue with projects.

       

      I still am not sure who I'm chatting with,  Is this lapworth ?

    3. laynrubber

      laynrubber

      Yeah, Shaune Lapworth

    4. Noonan
  16. I will definitely be keeping my eyes open for the proper plymouth grill pieces. it may depend on this other hood assembly that is claimed to be original with the car that isn't installed. Because it looks like some hoods run the full length out to the nose and some hoods stop short and the grill assembly swoops back to meet the hood
  17. Cool, thank you. If I am in need of some help to find components I will shoot you a message I also once purchased a mechanical fuel pump from Kanter. It was for my Canadian built 1953 Pontiac Laurentian Sport coupe that received the American engine from the factory. I could not get a mechanical fuel pump for it anywhere. The pricing was absurd. But when they got what you need sometimes....
  18. Andy, That looks like the trunk handle assembly that I have in the pile of spare parts. Good news !
  19. Marcel, What are some of your go-to sources for mopar parts?
×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.

Terms of Use