Kevins nightmare

Thanks guys, finally got her fired up. I had a draw on the battery from an open circuit so wasn't providing starter with enough juice.

Hey all, had low oil pressure issue and rearmain seal leak, sure enough I needed new rod bearings. Replaced the mains because I was there also reringed and honed the cylinders to break the glaze. After all that I have a no start issue, I pulled the distributor and rechecked the points everything was good checked spark at each plug and there is spark. Now I'm stumped as to why Iits not firing up. Anyhelp would be fantastic. Thanks all. Also after rering I'm getting 88psi to 93psi compression.