Jump to content

Hickory

Members
  • Posts

    756
  • Joined

  • Last visited

  • Days Won

    17

Everything posted by Hickory

  1. No replacement yet still arguing with insurance company. Word of advice don't use regular insurance company for historic cars.
  2. Due to unfortunate events and a total loss of the 49, I haven't been on the forum for 7 months now. It's still a hard pill to swallow after all that work. I had an urge to lurk on the forum today and just wanted to check in.
  3. No injuries just lost my mind
  4. Fire broke out near the wood stove 36 hours after use. It's undetermined but maybe hot spot in wall or electrical
  5. Bad news, my last ride of the season was last ride...
  6. I'm not scared too drive in the snow or the other drivers either. Here In Syracuse area use to it. It's the salt and liquid brine they put on the roads that would melt my car before the snow melts. ?
  7. One last, last drive. Two weekends straight in November ?
  8. I think a transmission on hardwood floors is interesting, my wife would kill me. On a box or not?. Boy I would love an overdrive but don't want to part with the money
  9. Been in fulton for 6 yrs but Phoenix area for 40+ yrs I may be interested in a trip around watkins glen this summer if the car is acting right. C45 allowed?
  10. Good eye Greg, lake right here in fulton
  11. Another pic
  12. Beautiful night in New York 65 out.
  13. Let me look threw the mess I call a garage, I removed the fronts also so I may have all 4 backing plates and drums but the shoes and cylinders were no good
  14. Well Ed I'm about 2 hrs away and have some sitting on my rear end I just pulled to do a Cherokee update
  15. Did this ever get resolved
  16. Finally saw the light of day. Just finished the Dana 35 diff swap and took her out for ice cream. Hasn't been out since October 10th
  17. Did you happen to use a test light or volt meter to see if the power is going to the contacts and through them, a couple of the wires inside the solenoid are soldered, I wonder if one came loose. I also would try moving the Bendix lever on the other end of the solenoid by hand. It should energized the starter if power is hooked up. Make sure it moves freely with some spring tension against it. It shouldn't feel sticky. There will be spring tension but it shouldn't hang up.
  18. You can also close the contacts manually with power applied the see off it works
  19. On the solenoid right behind the upper right terminal there are two contacts, when energized power should be on both sides of those contacts, if not clean them and check again if not then bend the lower one up a little and recheck
  20. I just had this problem with my 49royal. I removed the solenoid cover and used a test light to follow the path of power. I found power at the top of the contacts but not going to the bottom. So I cleaned the contacts and still nothing. There was a small gap in the contacts from years of cleaning, so I bent the lower contacts upward and all better. This was an intermittent issue that was heat related. Hope this helps
  21. It's coming along
  22. I tell my wife that the picture shows it's supposed to leak some oil
  23. This is what one of the side trunk panels looks like I've been making. Will post more pics soon
×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.

Terms of Use