Jump to content

Leaderboard


Popular Content

Showing content with the highest reputation since 01/19/2013 in Posts

  1. 17 points
    Roger1

    Lets see pic of your trucks

    1940 Plymouth Truck ,PT 105 ,98 % Original
  2. 14 points
    Sam Buchanan

    Leaving the Nest

    Today my '48 P15 attained a milepost of sorts.....the first foray away from the shop to the other toy box. Thanks to many hours reading archives of your past posts and the helpful hints offered when I asked, the ol' girl smoothly and effortlessly made the 25-mile round trip on a four-lane highway to the hangar and back. She cruises nicely at 55mph and tracks straight down the highway. The only wiggles are due to returning the waves and thumbs-up from other motorists. There is still work to do (house training for one thing...) but after four months of bumper-to-bumper attention the P15 has awakened from its five-year nap and is now a real road car.
  3. 13 points
    Pouring down rain this morning. Flood watch in effect. Headed to the shop in the dark when out of nowhere a huge fallen pine tree is hanging into my lane. At 45 mph it hit the roof on the passenger side near the corner of the windshield. Was expecting broken glass and significant damage. Nada.....zip....nothing. Not even a scratch. Got to love that old Detroit Iron. I am positive an impact like this would have messed up a newer truck. And yet the only evidence is a few pine needles. And an elevated heartbeat..... Old Pilothouse trucks RULE! Jeff
  4. 11 points
    Pete

    Lets see pic of your trucks

    My 1938 Dodge Brothers RC half ton. Picture taken about 20 years ago. It's seen a lot of work since then. Pete
  5. 11 points
    GttMtt

    Old photos

    My father and his side of the family were in the Ford and Dodge business their whole life. I found a few old photos that I feel should be appreciate by this group of Dodge enthusiasts. These and many others were found in my father and grandfather's things.
  6. 10 points
    derbydad276

    introduction

    new guy with a new toy 1953 Dodge Coronet ... barn car 33 k original miles came with a parts car
  7. 10 points
    jmooner3

    Lets see pic of your trucks

    We've got a couple of seasons up here in Vermont.... Beautiful summer for a week, winter for 7 months, mud season from April til June and of course the perfect weather for a drive in ol blue in the fall!
  8. 10 points
    "DD," my 1942 DeSoto, gets driven at least three times a week for local errands. She is completely stock--including the semi-automatic fluid drive--and runs like a dream. I am working now on DD2--another 1942 DeSoto. This one has some engine modifications, including three carburetors and slightly higher compression. Also a 200R4 transmission. Otherwise, stock....
  9. 10 points
    Old CWO

    Best way to pick up a Christmas tree

    Hello All, I have been a registered member here for a while but mostly lurk and/or search older posts for information. I thought I would finally contribute a little bit to the forum by posting a photo of my truck hauling our Christmas tree this year. Everyone like pictures of old Dodge trucks, right?
  10. 9 points
    Took a drive over to Scottsdale for the afternoon. Car is running fine... Needing shocks though...
  11. 9 points
    Worden18

    Me and the B-1-D

    I know I posted this on the forums somewhere previously, but here it is again. I painted this on canvas in 2017. My B-1-D is looking quite cold and a bit lonely sitting there in that shed. At the time I painted this I knew that someday I'd own a Pilot House truck. 😊 When I painted this my thoughts were the truck is fully tuned and ready to go, and the owner (me) is in the shed making sure the tire chains are secure before firing it up. 😁 Hope you guys like it!
  12. 9 points
    casper50

    Enjoyable Christmas decorations.

    Most will get into some xmas spirit trying to get enough empties. lol
  13. 9 points
  14. 9 points
    I have a lost dog for the moment.....didn't have a dish handy....or did I ? 48D
  15. 8 points
    couple more Tom's not afraid of no stinking mud puddle!
  16. 8 points
    I checked the brakes and steering and went down to the corner and back. It is not always easy to start so I didn’t want to walk home and my kid is in the house watching cartoons after dinner. I was more than a little nervous but the rusty rotors worked ok and the steering was pretty good too- a little more effort than the over-assisted 70s muscle cars I’m used to but nice. I live on top of a small hill in the middle of my block and it’s a 2 lane street that narrows when people park on the sides so I was just concentrating on making it home without killing the motor or finding a terrible problem the hard way. It’s got a loud thrum at idle that will take some dynamat to cure but it never threatened to die. The turning radius was decent (should be for a shortened dakota) and the power brakes seem to be working ok? Not amazing. Breaking them in from their slumber will help but the actual braking happens after a good bit of free travel and requires some force on the pedal. Maybe I will eventually go to a smaller bore master but time will tell. I’m super glad I extended the floor forward under the pedal so it could have more travel without a higher starting point. I hardly looked at the gauges but on the way back up the hill I gave it half throttle and good lord she’s got some stink! BIG milestone today.
  17. 8 points
    greg g

    New business for business coupe

  18. 8 points
    Matt Wilson

    Manifold Stud Replacement

    Ok, I have an update. This past Wednesday evening, I decided to give it a little go, by just trying the worst-looking stud. It was the rear-most stud. I turned the engine on its side (on the engine stand), took a pair of nuts, tightened them against each other and began applying some force with an open-end wrench on the bottom nut, in the loosening direction. At first, the nuts just turned on the stud, so I tightened up the nuts about as hard as I felt comfortable without stripping them. Then it was back at it with the wrench on the lower nut. To my surprise, the stud started to turn. I kept at it until I thought I could grip it with my vice-grips (not clamped down, but just using them like an ordinary pair of pliers) and I did this until the stud was out. Ok, I said, that went well....let's try another one. So I moved on to the next one and did the same thing. After the third or fourth one, I stopped using the two nuts and just used the vice-grips to get a very firm grip on the studs and removed them that way. Unbelievably, they all came out that way in less than an hour, except for the final one, which was the front-most one. I worked on that one for a little while, spraying penetrating oil and tapping with a brass mallet, grabbing with vice-grips, double-nutting it, etc., and it didn't budge. So....I let it sit with penetrating oil for a couple of days, till just a few minutes ago, when I went out there and tapped on it some more (actually several fairly sharp raps in all directions), then did the double-nut thing with the open-end wrench AND the vice-grips clamped down really tightly, placed 180 degrees opposite the wrench. I grabbed the wrench with one hand and vice-grips with the other and applied quite a bit of force to each. I was a little afraid I was getting close to the point where the stud could twist off, so was about to give up and try some heat, when.....voila!....the stud started to turn. So I kept at this until it was removed, though it fought me most of the way. But in the end, I prevailed. Now I have a nice, stud-free manifold mating surface. I'm glad I went ahead and did this. It was really a pretty small effort. I think I will now try to clean up the surface with a few light file strokes, or maybe a very brief/light sanding with my Black and Decker Mouse (which is a small orbital type of sander, I guess you'd say), as the manifold surface looks somewhat pitted. I suppose I could even take it back to my machinist and have him surface that region to get it really good, but not sure if need to do that and I'd prefer to avoid it if possible. Following that, I will clean out the threaded holes with a thread chaser, and spray the holes nice and clean with brake parts cleaner and install new studs with sealant or maybe anti-seize as suggested by MB Fowler in his post above. Thanks to everyone for the tips and more importantly for giving me the nudge to proceed with this. I was afraid it would going to turn into a nightmare, but it worked out amazingly well. I know it doesn't work out this way a lot of times, but I suppose I got lucky. I guess I was due, considering the trouble I've had with other areas of the project, LOL.
  19. 8 points
    Worden18

    Lets see pic of your trucks

    My 1948 B-1-D
  20. 8 points
    Gets parked most of the winter. But drive it as much as I can manage the rest of the year. Hits 75 mph almost every drive.
  21. 8 points
    desoto1939

    Wishing Everyone a Merry Christmas

    Hope everyone and their loved ones have a very Merry Christmas and a Happy New Year. If you are traveling to family and or friends please drive safe and arrive back home safe and sound. Hope everyone arrives with Bells on. This is an old saying that refers back to when in the winter time you would use a horse a sleigh to gets to your destination. If and when you got stuck in the snow the people that helped you get out of being stuck you would give them one of the sleigh bells that were attached to the horse as a way of saying thank you. So if you made the entire round trip will the bells still on your horse then you had no issues, So then you arrived with Bells on your sleigh. The bells were also used to warn other people on the road or going through the forest that a sleigh was approaching, so sort of our horn on our old cars. Since I live near Valley Forge PA I am thankful for all of the people that had stayed with General Washington at valley Forge during the winter encampment to help gain our Freedom and to form the Great United States of America. Least we forget about these strong willed men and boys that stood up to get this Great nation started and also to our current men and women that are serving in our Armed Forces to still support our freedom and to protect our great country. If you know of any family that might have a person serving please tell the family that you thank them and their family member for their support. Rich Hartung Valley forge, PA Desoto1939@aol.com
  22. 8 points
    I was absentmindedly thumbing through the latest issue of Old Cars Weekly, when I saw an ad saying there is still time to buy your "Old Cars Weekly Riders Ride 2019 Calendar" The B&W picture was a woodie that had to be a '40-'41 Plymouth. They are the only production woodie wagons that I know of that all four doors are full rectangles -all other have a dogleg cutout for the second set of doors. As I looked closer I realized that it was MY wagon! I had forgotten that I sent pictures to OCW six months ago for the 2019 calendar, but they never told me I had made the cover! Below is a picture of when I found the wagon on eBay in 2003, and last year after I had it pretty much finished. So I guess I should say get your calendar now?
  23. 8 points
    plymjim

    leftover parts

    So when you shave the deck lid on your Plymouth what do you do with the brake light lens? Here's the stained glass window our daughter made with mine. Reuse, repurpose, whatever. Just never throw parts away!
  24. 8 points
    I've been known to scribble on some paper. This selection of subjects are still vehicle related though.
  25. 8 points
    PT81Jan

    Droopy door handle

    Radarsonwheels, my PT had a hanging door handle on the driver side like yours. I really didn`t like that hanging thing, so I put it on to the to do list for the winter. But just some weeks ago the handle completely gave in and was hanging vertically down. I expected a broken spring. I pulled out the door latch assembly saw no obvious damage. After dismantling the latch assembly and figure out how these parts work together it was clear the reason was wear. Enclosed some pictures, which may help to understand and fix the latch in case yours has got the same problem: Blue arrows shows the edge which was worn. The green line indicates where the edge should be. I fixed this by welding material to the latch and grind it to correct length. Note: It helps a lot to draw the outlines to a board before welding (picture 4). So it is easier to grind the edge to the proper length. Picture 5 shows the worn edge (red line) which led to a gap to the rotating piece (green line) and thus to the wobbly/hanging handle Picture 6 displays the fixed edge. No gap - no wobble, no hanging handle 😊
  26. 7 points
    Worden18

    Me and the B-1-D

    January 7, 2019: Fellas, I'm so excited to share my latest find with you! I have been searching for this truck for a LONG time; I was almost certain it did not exist. And for it to turn up in Minnesota, an hour and a half from me is truly amazing. It's a 1948 B-1-D 5 window Express 1 ton with the 9 foot box. 230 with the 4 speed tranny. Originally came from a grain farm in North Dakota. There's no rust on it, and after further inspection it does look like the original paint, which is Dodge truck red for 1948. Odometer reads 32K. It's not running, but I'm confident we will have it going this week. PO said it was running last summer, but he had lost spark recently. He had it for 5 years and didn't do anything with it. Needs brakes of course. I can handle that on my own. It is truly a survivor! I'm certain the rear bumper is handmade. I don't believe the wood in the bed is original, and I don't believe the seat covering and door panels are original. But they are old for sure. Has anyone ever seen that type of material on these old trucks? Anyway, I have a lot of questions, but I doubt I will get to them tonight. For now guys, just enjoy the pictures. 😊
  27. 7 points
    tanda62

    She Runs!

    Got the assembly to the point of engine running for the 53 B4C. Dodge running.mp4
  28. 7 points
  29. 7 points
    Just came in this afternoon. Serial number 003. If I can get past the cancer,I hope to put it in the dead stock 33 Dodge shown in the photos,and drive it around and enjoy the HELL out of it just like you see it in the photos. This was the type of car I used to see running around when I was a kid that you could buy and enjoy for 50 bucks because I had some hope of one day having 50 bucks. Had and still have practically zero interest in new cars,but I LOVED the hell out of stuff from the 30's and 40's. I will never win any prizes at car shows or runs with it,but you can bet there will be nobody there having more fun than me. Had a local guy ask me last year if I knew anybody interested in buying the good running 251 6 out of his 51 DeSoto for 250 bucks,so I snapped it up and it is now sitting on my garage floor next to the 33 Dodge. I also have dual carb aluminum intake and carbs for it. About the only piece I am missing that I can think of is a set of cast iron headers. so I can run duals. I prefer the sound of the cast iron over the tubular headers. Every time I think about this I want to stop what I am doing and do a little happy dance.
  30. 7 points
    hkestes41

    Cool P15 Photo

    Cool old photo I found on another site. P15 Police Cars.
  31. 7 points
    rockable

    Finished my 41 Plymouth

    Rather than reposting all this, I will just post my link to the HAMB. I really appreciate the help I received from you guys! https://www.jalopyjournal.com/forum/threads/finished-my-41-plymouth.1140466/#post-12963394
  32. 7 points
  33. 7 points
    Don't drive during winter here in Wisconsin but do get around during better weather. 1-Driving thru Metropolis IL, 2-Memphis, 3-Arrive Daytona, 4-Daytona Beach for the Turkey Run, 5-Talledega Speedway on the trip home. Also have some photos somewhere of the car at Operaland, Don Garlits museum, and in Daytona Speedway pits. 3700 mile trip, just my wife and my 48 P15, 440 powered.
  34. 7 points
    Dodgeb4ya

    Lets see pic of your trucks

    Some of mine are sleeping in the cold....
  35. 7 points
    JBNeal

    Lets see pic of your trucks

    3 days ago it was in the 80s...now I've got snow and sleet falling on the dandelions in the yahd... February in TX...LOVE IT
  36. 7 points
    48Dodger

    Motor and tranny swap

    Easiest? For a beginner? Since you asked. 1. Learn the original intent of the vehicle (work truck, farm truck, tow truck, delivery truck, etc...) 2. Clarify what the new intent is for the vehicle (show truck, crusier truck, race truck, etc...) 3. Find a build that's complete and that you yourself have experienced (ie you rode in it as a passenger or were allowed to test drive it) 4. Copy that build with the help of the person who owns said vehicle. I firmly believe you shouldn't "custom" build any vehicle as your first project....especially if you put in a passenger seat. Keep it fun by keep'n it safe. 48D
  37. 7 points
    Cast the magic wand (read hard work, sweat and bruised knuckles) and here's what we ended up with:
  38. 7 points
    I would like to take a minute here and extend a Happy Holidays wish to my forum members and express a heartfelt thank you to all of the folks here who have shared their knowledge and time to help me in my effort of working towards the restoration of our 46 Plymouth Club Coupe project. Many of you have helped on occasion, and a few have really been generous with their time and knowledge helping me work through issues and concerns. I'm sure just like many of the members here on the forum, I want the very best for this old car, and that pertains down to each and every nut and bolt connection, piece and part. However, it is without a doubt obvious that I am way on the upper end of being obsessive compulsive about it all. In all honesty, if I could change it, I would, it's more of a curse than anything else...anyway - at 62 yrs old I don't suppose I'll be able to have much change on the way this old mind of mine works for the remaining years I have. That said, I would like to express my appreciation and sincere thanks for many that immediately come to mind, here on the forum, that have hung in there with me, and obviously have gone above and beyond to always try to help answer the many questions I have posted here on the forum, over the past few years.....Plymouthy Adams especially has been second to none, (as I have pm'd him so many times, even called him direct on the phone, etc...as I value his knowledge so very much, and also many others immediately come to mind, Young Ed is another that always helps and is quick to share information and knowledge with others, he has helped me many times,..DB4ya is another, Andy down in Australia,..Don Coatney is another,...and certainly over the past few years there have been quite a few others who have been good enough to share info and help me out...again, thank you all for each and every minute you took from your time to try and assist me...I am extremely thankful for your efforts, and so very thankful for the day that I found and joined this forum. Steve
  39. 7 points
    Thanks! I took my time and spent a lot of time searching for parts. One of the hardest choices was what color to paint it? Mother Chrysler made the '40 wagons (and earlier) kind of like a beige blob going down the road -beige paint, tan roof, non-contrasting wood, yellow brackets etc. One of my goals was to highlight the craftsmanship of the era, so I went with the darker green, contrasting ash structural pieces with mahogany panels, and powdered coated the brackets and seat frames with bronze, and copper. Found a local upholster who duplicated the original french stitch on the seats. Tom Gagner ('41 Plymouth woodie owner) and I had the original window sliding knobs reproduced, by an old radio restorer, etc. Details are what make a good restoration, and Forum member's advice kept me from quitting many times! All yours now for only $4.95!
  40. 7 points
    I dig up volunteer mimosa, pecan and burr oak trees around the place, pot them for 3 years, then plant in strategic locations for myself or my neighbors, also gift them to friends and neighbors with planting and care support...so I reckon there's almost 200 more trees around TX than there was 15 years ago thanks to my green thumb...the trees are nice to look at, but around these parts, they really become valuable when they begin to produce shade
  41. 6 points
    My experience is a bit different. Dual Webers, shorty headers into a single 2.25 exhaust made a noticeable difference with no internal engine mods.
  42. 6 points
    PT81Jan

    Lets see pic of your trucks

    Location: Very South of Germany A quick prestory to the pictures ... Today I went to the Lake to go for a walk with the dog and taking some pictures of my 1939 PT ... But first a quick jump to the last weekend. Winter suddenly has stopped, rain had washed away the salt from the roads over night. I went to the lake early in the morning. Sun was just before rising up. I could see a yellow orange stripe along the horizon, super clear water, swans slowly waking up. What a panorama !!! From our side of the shore you can see the mountains of the Swiss Alps, if the sky is clear. That morning they where super clear, white shining snow on top. Simply perfect ! Unfortunately I neither had a camera nor my PT with me. So I decided to come back the next weekend ... Today morning , Feb. 23rd, 2019 something between 6.00 and 6.30 a.m. Knowing that there is just one access to the shore and it is strictly forbidden to enter it with a vehicle, I arrived a bit too early. Drove in with a slight bad conscience. Nobody was there. But today, no mountain view, just a grey haze. No swan just some scattered ducks. No orange horizon. Damned. Since I took the risk to get serious trouble, I yet decided to take some quick shots with the camera and quickly sneak away off of the shore. Jumped into the truck, wrooom, rear wheels scrabbled in the sand, ooops. A bit less throttle, but too late. Rear wheels went deeper and deeper .... then a man walked by, he was looking a bit wrathful / surprised. I probably like a caught little boy. But hey, that was a colleague from work !! I quick explained my situation, he just: ohooohhh. Now to make it short. He rushed to his home, came back with his car and a rope. (Still nobody else came to the shore - biiig trouble, if the sheriff or a conservationist would have appeared). Hooked in the rope and towed me out of my awkward situation. Yesss !!! I asked him what he wants to get, but he did refuse ... "hmm, maybe a ride in the PT !?" he said. So yes, I gladly will take him to a tour along the lake !!! So here some adventure pics I shot, although they are certainly not perfect: Was it worth it ? For me YESSS !
  43. 6 points
    Brent B3B

    Lets see pic of your trucks

    Hey I have a blue (ish) truck 😄
  44. 6 points
    Drove my 49 for a month while my kid was home from college. rain, shine, hail and a leaky windshield, added another 1000 miles to the clock... Need to revisit the vacuum wipers
  45. 6 points
    Work in progress- my supervisor is in the one shot!
  46. 6 points
    3” dropped rear springs 2” blocks. Stock front. Going to lop off a coil this weekend.
  47. 6 points
    It was a nice sunny day today... took my pick up for a drive in the warming sun...... Spring is around the corner!
  48. 6 points
    Here’s a shot with the straightened driver’s handle, the airbags set at a cushy 20 psi for what looks like a good neutral or barely raked stance, and the bed & body mounts and bolts are all torqued down for the first time. It came a long way since it was truely the ancient farm truck in the first picture with all mostly original chassis.
  49. 6 points
    Oldguy48

    A Mopar Family Christmas

    Just had to share a photo of my grandkids, This was a Christmas photo taken yesterday!with the P15!
  50. 6 points
    MBFowler

    Best way to pick up a Christmas tree

    Taking the tree to my local volunteer FD for our Christmas party


×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.

Terms of Use