David Tweet Posted April 8, 2019 Report Share Posted April 8, 2019 Trying to configure the spare tire retaining assembly, between frame rails at rear. There is a crossmember, but nothing else. Have to fab something close to stock, would it be possible for someone to post a photo of the assembly? Thank you. Dave. Quote Link to comment Share on other sites More sharing options...
Merle Coggins Posted April 8, 2019 Report Share Posted April 8, 2019 One end connects to a cross member. A piece of "C" channel bolted to the frame rails. The other end connects to the frame at the rear left side. Quote Link to comment Share on other sites More sharing options...
Dodgeb4ya Posted April 8, 2019 Report Share Posted April 8, 2019 Quote Link to comment Share on other sites More sharing options...
Plymouthy Adams Posted April 8, 2019 Report Share Posted April 8, 2019 little he-man grunt and dirt in your eyes....I remember these well...... Quote Link to comment Share on other sites More sharing options...
David Tweet Posted April 8, 2019 Author Report Share Posted April 8, 2019 Right on thank you, I’ll go off these pics for the spare mounting. Nibble away at the elephant! thx d 1 Quote Link to comment Share on other sites More sharing options...
Jerry Roberts Posted April 8, 2019 Report Share Posted April 8, 2019 (edited) The underside part often comes up on ebay , for more photos if nothing else . Dodge Central of Michigan shows one ; Spare Tire Carrier part number B-606 with bolts at $255 . For 15 " , 16" , and 20 " wheels , for the guy who doesn't want to make his own . Edited April 10, 2019 by Jerry Roberts Quote Link to comment Share on other sites More sharing options...
David Tweet Posted April 9, 2019 Author Report Share Posted April 9, 2019 Ok thanks again, on to the eBay ... Quote Link to comment Share on other sites More sharing options...
sleepy Posted May 9, 2019 Report Share Posted May 9, 2019 I have scored a couple of the cable lift type from newer trucks and bolt into the crossmember. Crank up and down. Saves the eyes and body. Brian Quote Link to comment Share on other sites More sharing options...
Plymouthy Adams Posted May 9, 2019 Report Share Posted May 9, 2019 this is the third car I own with the spare tire cradle and lowering/raising from inside the trunk..pic show empty spare cradle and a little repair work needed...(PO bondo on dent and poorly done at that)...adds to trunk space on the smaller vehicle. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.