belvedere Posted February 28, 2019 Report Share Posted February 28, 2019 (edited) Does anyone sell a head stud set for the flat 6? I have a 230 with a stock head. Thanks! Edited February 28, 2019 by belvedere Quote Link to comment Share on other sites More sharing options...
jeffsunzeri Posted February 28, 2019 Report Share Posted February 28, 2019 Vintage Power Wagons Quote Link to comment Share on other sites More sharing options...
DJ194950 Posted February 28, 2019 Report Share Posted February 28, 2019 4 hours ago, jeffsunzeri said: Vintage Power Wagons I looked they sell stock type and ARP studs, washers and nuts. Arp make the highest quality bolts,studs, etc on the automobile market yet not too high $$. JMO. You will find Arp products at Summit Racing and others for less $$, maybe?? Worth a look?? https://arp-bolts.com/kits/Product.php?PL=29 DJ 1 Quote Link to comment Share on other sites More sharing options...
40desoto Posted December 16, 2019 Report Share Posted December 16, 2019 I recently purchased an ARP stud kit listed for a Chrysler L6 engine (ARP 142-4001). Didnt notice until the the package arrived and I opened the box that it only included 15 studs but the head on my 265 requires 21. Watch out for this Quote Link to comment Share on other sites More sharing options...
kencombs Posted December 16, 2019 Report Share Posted December 16, 2019 3 hours ago, 40desoto said: ARP 142-4001 Are they the right length? That arp number shows to be a slant 6 package. Quote Link to comment Share on other sites More sharing options...
maok Posted December 16, 2019 Report Share Posted December 16, 2019 I bought ford model a studs for my '28. The short ones were about 1/2" longer and had to use a washer under nut, which is not the end of the world. Quote Link to comment Share on other sites More sharing options...
40desoto Posted December 16, 2019 Report Share Posted December 16, 2019 Was just informed when i contacted ARP tech support.??♂️ Purchased from Summit and I will be returning. What threw me off was the reference to cast iron head for L6 Chrysler engine. found this elsewhere on a post here. om the secret file that the missus will never see (or, at least, I hope not): ARP, Ventura, CA 10/12/16 AP3.750-ILB Head stud- 7/16/x 3.75 Long broached (21 @ $5.38) $112.98 APN58 7/16 x 20 Hex nut (head) (21 @ $ .80) $16.80 APW1316N 7/16 ID 13/160D non-chamfered washer (21 @ $ .98 $20.58 Shipping $18.20 Quote Link to comment Share on other sites More sharing options...
40desoto Posted January 3, 2020 Report Share Posted January 3, 2020 On 12/16/2019 at 11:48 AM, kencombs said: Are they the right length? That arp number shows to be a slant 6 package. Completely wrong kit! Studs about 1 1/2 inch too long. Quote Link to comment Share on other sites More sharing options...
James_Douglas Posted January 3, 2020 Report Share Posted January 3, 2020 My ARP Main and Head Stud Order from 2005 that is running in my 251 engine since then. Quote Link to comment Share on other sites More sharing options...
Loren Posted March 11, 2020 Report Share Posted March 11, 2020 Thanks to James Douglas for the part numbers! I ordered the above for my 265 today. I got somebody at ARP on the phone who acted like I was taking up his important time. He was very direct (which is to say short) but we got it done! He wanted to direct me to a distributer but I told him they only wanted to sell kits, then without a pause went right into my order. $230. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.