Brian Ross Posted December 16, 2018 Report Share Posted December 16, 2018 I have owned this truck for approx 8 years after hauling it back from the lower mainland of BC. The only major problem is the brakes. I have removed the front wheels and drums. The shoes are practically new and no scoring ridge on the drums. Wheel cylinders are a different story. They are all seized. What I am having difficulty with is finding wheel cylinders. The mod# listed on the door post is as noted in the heading. I can find lots that look very similiar but none have included the mod # of my truck. The truck was made in Windsor , Ontario. The cylinders that I removed are 1 3/8 diameter and are Wagner brand on the rubbers. The listings also make note of several axels, is there a location where I can find an Axel #. I have a reproduction manual but it does not appear to be much help. The engine is a flat head 6 that purrs like a kitten. Any help or comments appreciated. Newby on this forum Quote Link to comment Share on other sites More sharing options...
Dave72dt Posted December 16, 2018 Report Share Posted December 16, 2018 Give your wheel cylinders a good scrubbing on the outside. You may find number cast or stamped into it. Those numbers if you can find them, should transfer directly to a Wagner #. Quote Link to comment Share on other sites More sharing options...
JBNeal Posted December 16, 2018 Report Share Posted December 16, 2018 (edited) additional information - Brake Sleeving Testimonial Edited October 16, 2019 by JBNeal revised link Quote Link to comment Share on other sites More sharing options...
Charlie Stephenson Posted December 17, 2018 Report Share Posted December 17, 2018 I need a 413.16 engine for mine, it's a long nose 4.5 ton? Charlie Stephenson Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.