1933 Dodge with 1953 flathead 6--- TRANSMISSION HELP NEEDED

[sactownog]

Good afternoon fellas,I need a bit of help.

 

I have a 1933 Dodge DP six 4 door sedan with a 1953 Dodge Flat Head 6 that currently has a 3 speed manual transmission. 

 

what I am wanting to do is swap out the transmission for a 1983-1987 Chevy S-10 6cyl 3 speed transmission with O/D. 

 

I am a bit confused on the process, I have read articles and other posts on this, but my issue is going to be the process involving the bell housing/clutch/flywheel... I can pretty much fabricate any transmission cross member mounts and do much of the fabrication work my self, however I am not sure what parts I need exactly to get the process started. 

 

I am considering taking out the engine for full rebuild and then doing the transmission swap, but if I can do the transmission swap without taking the engine out, that would be my 1st go to as the engine runs great now with minimal leaks. 

[Don Coatney]

Follow this link and look at ll the pictures. Then ask questions and I will answer.

 

http://smg.photobucket.com/user/DonCoatney/library/T-5?sort=3&page=1

 

 

[sactownog]

23 minutes ago, Don Coatney said:

Follow this link and look at ll the pictures. Then ask questions and I will answer.

 

http://smg.photobucket.com/user/DonCoatney/library/T-5?sort=3&page=1

 

 

I have read all of your posts on FB Don and I appreciate all your help. my issue is finding the year transmission that will work best, also, is your wright up for a 4 door 33 Dodge or a different year? 

[Don Coatney]

45 minutes ago, sactownog said:

I have read all of your posts on FB Don and I appreciate all your help. my issue is finding the year transmission that will work best, also, is your wright up for a 4 door 33 Dodge or a different year? 

1948 P-15