Keith Kapp Posted August 10, 2018 Report Share Posted August 10, 2018 Hello, Newbie here, I just acquired a 1952 Dodge B-3. I see a bunch of B-3-Bs, but mine is a B-3-C, which I think is a 3/4 ton. It is a 116 wheelbase, so long bed. It is in fair shape for its age and I intend to drive it. Anyway, I have started to change out brake wheel cylinders and ran into a problem with the right rear drum. The drum had not been tight on the axle, so it spun just a little, but didn't shear the key. However, it cracked the hub which allowed moisture to enter and corrosion, I assume is preventing me from pulling it off with my medium duty gear puller. I have applied PB Blaster and heat. Spending several hours so far and it is not off yet. I need a beefier puller. I'll also need a drum. I found a part number on line for Atlas that I think may be correct. 962-047. Does anyone know various applications of this drum? Also a good lead for obtaining one in good shape....Thanks, Keith Quote Link to comment Share on other sites More sharing options...
FlashBuddy Posted August 11, 2018 Report Share Posted August 11, 2018 (edited) Medium duty puller on these trucks?! Edited August 11, 2018 by FlashBuddy Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.