Jj1981 Posted May 19, 2018 Report Share Posted May 19, 2018 Trying to remove inside door handle to fix mechanism thanks Quote Link to comment Share on other sites More sharing options...
Jj1981 Posted May 19, 2018 Author Report Share Posted May 19, 2018 Is there a spring in the door handle mechanism Quote Link to comment Share on other sites More sharing options...
Plymouthy Adams Posted May 19, 2018 Report Share Posted May 19, 2018 you should press in on the escutcheon which will have a fair resistance as you depress the spring behind it...once depressed you should see a pin that is about 3/32 in diameter....as you hold the pressure, depress the pin and hopefully it will slide out easily with a scribe or other suitable tool..if stuck a bit, you may need a couple more hands to tap the pip with a smaller hammer... Quote Link to comment Share on other sites More sharing options...
Jj1981 Posted May 19, 2018 Author Report Share Posted May 19, 2018 Ok I got the handle out and the exterior handle off does the window have to come out to get the door mechanism out of the door thanks Quote Link to comment Share on other sites More sharing options...
Desotodav Posted May 19, 2018 Report Share Posted May 19, 2018 The window channel near the center of the door gets in the way... so it's best to remove it to get the door latch mechanism out. There 2 screws down at the bottom of the vent window channel and another 2 down to the bottom of that channel which are accessed from the inside of the door. Quote Link to comment Share on other sites More sharing options...
Jj1981 Posted May 20, 2018 Author Report Share Posted May 20, 2018 Ok thanks once the channel is out will the mechanism come out I had it all free but couldn’t remove thanks again Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.