thrashfit Posted April 30, 2018 Report Share Posted April 30, 2018 (edited) Hi All, I have put the cab onto the chassis but need the height or gap between the chassis and rear of cab and the height between the front outrigger and cab. At the moment its too low as when attempting to fit side steps the "dimples" touch the bottom of the cab so it needs to go higher. This correct setting will allow the fitting of the front inner and outer wings to hopefully align up. So if someone can measure their truck setup height I would be most happy. Cheers, Dave Just added, has anyone got a web site or drawing that I could get a rough measurement from , Thanks Edited May 1, 2018 by thrashfit Quote Link to comment Share on other sites More sharing options...
thrashfit Posted May 1, 2018 Author Report Share Posted May 1, 2018 A build drawing would be helpful........ Quote Link to comment Share on other sites More sharing options...
Merle Coggins Posted May 1, 2018 Report Share Posted May 1, 2018 I don't see a rubber mount between the cab and the mount arm. This is the cab mount arrangement from the shop manual. I don't have any measurements. Quote Link to comment Share on other sites More sharing options...
Brent B3B Posted May 1, 2018 Report Share Posted May 1, 2018 1 hour ago, thrashfit said: A build drawing would be helpful........ you have probably seen the resources already http://dodgepilothouseclub.org/know/blueprints/index.htm but, it is one of my favorite places to visit so I am posting it again 1 Quote Link to comment Share on other sites More sharing options...
thrashfit Posted May 1, 2018 Author Report Share Posted May 1, 2018 Many thanks Merle and Brent , I have printed the pages and will be looking closely . Cheers Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.