Jump to content

Engine swap


Recommended Posts

I’ve been trying to upgrade my 218 flathead. Starting to wonder if it wouldn’t be better to do an engine swap. I like have the flathead because it’s unique, I have a 225 slant 6 and was wondering how hard is it to swap? Would the floor have to be cut and radiator moved like a v8 swap? Has anyone tried this?

Link to comment
Share on other sites

I understand the having the slant 6 on hand and wanting to use it...it is quite power plant overall but you just stepping forward in technology by one year.....the length of the slant 6 is as much a problem as adding any V8.  Before making the call I would ask you study it a bit more before starting the transformation.  It is a bit of work involved that will as I said, still limits you overall verse a more modern V6 or V8.    late model Dodge V6 engines are running as much as 305 ponies from 221 cubic inches...

  • Like 1
Link to comment
Share on other sites

I really doubt that adding 6 carbs would make up for a gear change...the rpm will still be the same.

If the fan noise at freeway speed is causing you fright then swap to a clutch unit.

Link to comment
Share on other sites

A rear gear swap to 3.73’s in my 55 got me cruising down the highway at 70 all the time. It had plenty of power to pull the hills. However, with the RPM’s, fan and glasspacks, it was a tad noisy. However, much easier and economical than an engine upgrade.

 

Link to comment
Share on other sites

depends upon your initiative and luck searching local yards for better gear ratio for the axle of the era...else, many do the modern rear gear upgrade not only for the ratio but for the floating brakes.....this eliminates the puller and the need for the brake tool for the rear axle.  

Edited by Plymouthy Adams
Link to comment
Share on other sites

I would say the rear end swap would be first in line, even with the slant 6 you would want better gearing.

Then would consider upgrading to disk brakes in front, simple and reasonably priced.

From there I would consider if wanted to upgrade motor and trans.

 

I hear that 2 single barrel carbs will distribute the fuel more equally then a single 2 barrel.

More power and economy ... vroom vroom!

Link to comment
Share on other sites

I lucked out and got an R10 overdrive transmission and a 3.73 gear set from a 54 Plymouth. The gears are out there but require searching. A Ford 8.8 is much easier to find and has a ton of gear ratios available and disc brakes. I guess it depends on how original looking you want to keep it.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.

Terms of Use