Bobby198412 Posted March 4, 2018 Report Share Posted March 4, 2018 Without buying a harness. What awg wiring do I use to redo everything. Headlights, horn, under dash, dom lights, parking lights, brake lights. Quote Link to comment Share on other sites More sharing options...
Don Coatney Posted March 4, 2018 Report Share Posted March 4, 2018 Depends on the amp load for every circuit. Do you have a shop manual? Have you done a search for a wiring diagram on this forum and elsewhere? Quote Link to comment Share on other sites More sharing options...
Bobby198412 Posted March 4, 2018 Author Report Share Posted March 4, 2018 I have a manual but I don't get any numbers on the wiring print. I'm looking for something like that to help. Quote Link to comment Share on other sites More sharing options...
knuckleharley Posted March 4, 2018 Report Share Posted March 4, 2018 16 minutes ago, Bobby198412 said: Without buying a harness. What awg wiring do I use to redo everything. Headlights, horn, under dash, dom lights, parking lights, brake lights. I am NOT trying to be disrespectful,just helpful. If you have to ask,you probably shouldn't be trying to build a wiring harness from scratch. Do yourself a favor and buy one with all the wires already ran and marked ever 12 inches or so. You will be glad you did. Quote Link to comment Share on other sites More sharing options...
Don Coatney Posted March 4, 2018 Report Share Posted March 4, 2018 3 minutes ago, Bobby198412 said: I have a manual but I don't get any numbers on the wiring print. I'm looking for something like that to help. You might want to check out the downloads section of this web page. Quote Link to comment Share on other sites More sharing options...
Bobby198412 Posted March 4, 2018 Author Report Share Posted March 4, 2018 I looked on her for manuals there isn't anything I need. Also whwre is the beset place to look for a 6v wiring harness for my car ? Quote Link to comment Share on other sites More sharing options...
Lloyd Posted March 4, 2018 Report Share Posted March 4, 2018 I would agree with Knuckle. Although there is not a lot to these harness's, it sure makes it easier to get one pre-made and less chance of problems. I got mine from Rhode Island Wiring: http://www.riwire.com/ Little expensive but just like original. Fit perfect. Also one called Rebel wiring harness which may be cheaper and require some mods but as I understand it works fine to. 1 Quote Link to comment Share on other sites More sharing options...
Plymouthy Adams Posted March 4, 2018 Report Share Posted March 4, 2018 be careful of aftermarket wiring as they advertise for some of the older cars but more a rodding application where upgrade to 12 volt is the norm. In the Plymouth shop manual the P15 does not give the gauge wiring on the schematic but all the later car schematics in the book show the gauge. So if staying 6 volt and such just to the next model year and use the gauge listed per circuit application as the components were basically the same for amperage ratings. On here the search for a Dodge D24 should garner a schematic that would also circuit for circuit list the correct gauge wire to use. 1 Quote Link to comment Share on other sites More sharing options...
ACJCF2 Posted March 5, 2018 Report Share Posted March 5, 2018 Rebel Wire makes 6 volt re-wire kit. I don't recall if it is a 9 or 12 wire kit. Check their website for current information. Great quality, great staff. Jim Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.