Jj1981 Posted February 3, 2018 Report Share Posted February 3, 2018 Can anyone give me a size of the fittings needed to go from the fuel pump to the carb on my 218 thanks. I have misplaced the original Quote Link to comment Share on other sites More sharing options...
desoto1939 Posted February 3, 2018 Report Share Posted February 3, 2018 It is a standard fitting and the tubing can be purchase and any good auto store if you aree talking about the steel fuel line I think it is 3/8 tubing or are you talking about the fitting that hold the needle valve? Rich Hartung Desoto1939@aol.com Quote Link to comment Share on other sites More sharing options...
Dartgame Posted February 3, 2018 Report Share Posted February 3, 2018 Should be 5/16 steel line with standard size flare nuts... 1 Quote Link to comment Share on other sites More sharing options...
Jj1981 Posted February 3, 2018 Author Report Share Posted February 3, 2018 Will any of the poly armor lines that advance sells be a direct fit as far as the fittings. Thanks Quote Link to comment Share on other sites More sharing options...
Dartgame Posted February 4, 2018 Report Share Posted February 4, 2018 (edited) Poly armor looks okay to me. Regular Nickel copper lines would work fine too - all are easy to bend into shape. You may have to cut and flare to length, be sure to use a double flaring tool. The fittings for 5/16 double flare compression fittings are made and work the same way. Edited February 4, 2018 by Dartgame Quote Link to comment Share on other sites More sharing options...
busycoupe Posted February 4, 2018 Report Share Posted February 4, 2018 I am not familiar with poly armor, but if “poly” refers to plastic you may want to be careful if you try to use this as the fuel passes close to the exhaust manifold. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.