Busted_Knuckles Posted February 2, 2018 Report Share Posted February 2, 2018 Can anyone tell me how to get the rear window regulator out on my 48 P15 coupe? I separated the glass form the regulator and got it out in one piece and there are no bolts left in, the regulator moves but its got me stumped well for right now. I refrained from breaking out the plasma cutter to remove the bottom of that pocket. So any input would be appreciated. Haven't had the time to go do a search on how to yet. Thanks Quote Link to comment Share on other sites More sharing options...
plymjim Posted February 2, 2018 Report Share Posted February 2, 2018 Quote Link to comment Share on other sites More sharing options...
plymjim Posted February 2, 2018 Report Share Posted February 2, 2018 Does the picture help? The 4 Phillips heads are all that shows on the inside of the car with upholstery removed. Remove them & it should come right out. The device in the square at bottom of picture. is where your handle attaches. (Plasma cutter not needed.) Quote Link to comment Share on other sites More sharing options...
Busted_Knuckles Posted February 2, 2018 Author Report Share Posted February 2, 2018 All the screws are out the track won't come free of the regulator Quote Link to comment Share on other sites More sharing options...
Andydodge Posted February 2, 2018 Report Share Posted February 2, 2018 It may have a small spring clip holding the regulator arm onto the elongated slot that the arms slide along...............or maybe not.............and is just held onto the slot by the tension/angle of the arm against the window channel.............andyd Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.