Jump to content

Heater issues


46plymike

Recommended Posts

Hi all, so I purchased my coupe as a basket case. Cab, chassis etc. And putting together is a big fun puzzle. But sometimes a snag. The heater is a comfort zone; core ,blower assy. with the hose attachment piece. It appears to be missing something because it doesn't match up with the firewall holes and I have no water flow controls. Any insight would helpful. Pictures too. Thanks,Mike 

Link to comment
Share on other sites

There were many heater options available. In 46 to 48  Comfort Master was popular  (models 503 and 504 as I recall.) also many aftermarket heaters were available.    Some did not have water controls except for a shut off usually mounted at the rear of the head.

Link to comment
Share on other sites

Sorry,should have mentioned that is was a comfort zone.  The cores hose connection were all mangled so I repair them by soldering new tubes from an old core I had hanging around. So i could heat and bend them to fit the existing holes but i dont see any evidence of  holes for the 2 mounting brackets attatched to the back.,Thanks

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.

Terms of Use