Jump to content

Carb info


porters

Recommended Posts

I have a old Fenton 2 carb intake manifold on my 48 sd club coupe. The carbs say Chrysler Corporation on the side. The stamp on the top of the carbs say D 6G1 and on one side it says 0-370. Can anyone help in identifying these carbs?  Thanks Mike

 

Link to comment
Share on other sites

your carb model is the D6G1. So you would look for a carter Carb kit or jiffy kit that you fit your model and also there are specific gaskets that also fit this carb.  the 0-370 is a carter part number for the airhorn part on the carb but the model carb is theD6G1.

 

Rich HArtung

Desoto1939@aol.com

Link to comment
Share on other sites

17 minutes ago, Plymouthy Adams said:

I bought about 6 of these rebuild kits at a swap meet for 3.25 a kit....complete......ALWAYS pays to look in the boxes under the tables...

i'll give you about 3.50

Link to comment
Share on other sites

the inner parts of these older cater carbs used alot of brass small parts. The only thing that might get affected by the ethinol might be the acclerator pump leather or if you have a rubber tip on you needle valve. Not really any rubber parts inside the old carter carbs.  There a few littler small gaskets that might get affected but not sure.

 

rich hartung

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.

Terms of Use