comedtech63 Posted October 18, 2017 Report Share Posted October 18, 2017 my 1940 dodge business coupe is need of floor pans and rocker panels my question is has anyone ever used the Plymouth Doctor or can some one recommend someone else thanks Quote Link to comment Share on other sites More sharing options...
40phil41 Posted October 18, 2017 Report Share Posted October 18, 2017 12 hours ago, comedtech63 said: my 1940 dodge business coupe is need of floor pans and rocker panels my question is has anyone ever used the Plymouth Doctor or can some one recommend someone else thanks Do a search in the off topic section and you will find lots of opinions. Phil Quote Link to comment Share on other sites More sharing options...
kridgleyud Posted October 18, 2017 Report Share Posted October 18, 2017 I had good luck with classic 2 current fabrication on the toe board. Quote Link to comment Share on other sites More sharing options...
LazyK Posted October 18, 2017 Report Share Posted October 18, 2017 classicparts4u http://stores.ebay.com/classicparts4u/DODGE-BODY-PANELS-/_i.html?_fsub=2433466011 Quote Link to comment Share on other sites More sharing options...
Plymouthy Adams Posted October 18, 2017 Report Share Posted October 18, 2017 as a word of caution...not all metal benders are equal....of the three names mentioned, I have experience with two....the original rockers were stamped and todays are bent on a brake...watch carefully in outer rockers....if your body has a curve along the lower edge...some do not put that curve into their panel......not a big deal if you have shrinker/stretcher tools...easy to check your needs with a straight edge... Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.