48hoopty Posted September 30, 2017 Report Share Posted September 30, 2017 So I went out and acquired an 8.8 rear axle out of an 02 explorer sport. 3.55 gears and disc brakes. Upon preliminary measurements the spring width and frame width is 48.25". The distance between the calipers, especially the banjo bolts, is a bit under 47". According you public school math that means a portion of the calipers will be inside between the frame and spring. My question has to do with lowering the rear. Goal is somewhere in the 2-3" range. Who has done this swap and are there any interference issues with range of spring travel between caliper and frame with this drop. Thanks. Dave Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.