medium_jon Posted September 23, 2017 Report Share Posted September 23, 2017 @Veemoney I really like the wood grain on the console. Good work Quote Link to comment Share on other sites More sharing options...
Silverdome Posted September 23, 2017 Author Report Share Posted September 23, 2017 Veemoney, thanks that looks real nice. Did you just dob the stain on with that open pored sponge? Mortimer452, thanks, my dash isn't too bad yet but my garnish moldings were pretty worn so I started with them for preservation purposes if nothing else. 1 Quote Link to comment Share on other sites More sharing options...
Veemoney Posted September 23, 2017 Report Share Posted September 23, 2017 I used a paint brush to load the sponge so as not be gob it on to thick to start, then a flat piece of sheet metal to unload and test then just dob it on. You don't need much on the sponge. The flash of the camera on the close-up doesn't do the color justice. Quote Link to comment Share on other sites More sharing options...
Cannuck Posted September 23, 2017 Report Share Posted September 23, 2017 Great article .My trim and dash all have to be done .I didn't have a clue how to proceed now I do . I thought all examples looked good . Quote Link to comment Share on other sites More sharing options...
Jdee Posted September 25, 2017 Report Share Posted September 25, 2017 (edited) Here are some close pics of the 47.I have some close-up pics here. Jdee Edited September 25, 2017 by Jdee add pic Quote Link to comment Share on other sites More sharing options...
busycoupe Posted September 25, 2017 Report Share Posted September 25, 2017 Jedee, did you do the wood graininess? Or is it original? If you did it, what process did you use? Quote Link to comment Share on other sites More sharing options...
Jdee Posted September 25, 2017 Report Share Posted September 25, 2017 The pic of the two colors are originals. It is our tools from Grain It. that were used in this pic. Jdee 1 Quote Link to comment Share on other sites More sharing options...
Niel Hoback Posted September 25, 2017 Report Share Posted September 25, 2017 Wow! I call that perfect. Quote Link to comment Share on other sites More sharing options...
Silverdome Posted September 25, 2017 Author Report Share Posted September 25, 2017 Very nice jdee. 1 Quote Link to comment Share on other sites More sharing options...
Cannuck Posted September 25, 2017 Report Share Posted September 25, 2017 That is really good , same colour as my 48 dodge Quote Link to comment Share on other sites More sharing options...
Jdee Posted September 25, 2017 Report Share Posted September 25, 2017 Thanks. The Sapele pattern was used on a lot of cars. We have a video up that shows a lot of patterns and what they were used on. In this video It shows the Sapele starting at the 5:00 mark. Youtube video here. Jdee 1 Quote Link to comment Share on other sites More sharing options...
Jdee Posted September 25, 2017 Report Share Posted September 25, 2017 On 9/20/2017 at 10:29 AM, LazyK said: does anyone have a photo of the grain pattern and color that was used on a 51 plymouth cranbrook. I'm thinking about having my dash hydro dipped ( https://en.wikipedia.org/wiki/Hydrographics_(printing) ) and would like to find a pattern close to the original. Here is a pic of a part I have in the shop. Jdee Quote Link to comment Share on other sites More sharing options...
Jdee Posted September 25, 2017 Report Share Posted September 25, 2017 Silverdome those came out really nice. Those driftwood colors can be tricky Jdee. Quote Link to comment Share on other sites More sharing options...
busycoupe Posted September 25, 2017 Report Share Posted September 25, 2017 Thanks for the reply. Very nice work on the wood grain. Do you work for Grain it, or do you have your own business? Quote Link to comment Share on other sites More sharing options...
Jdee Posted September 25, 2017 Report Share Posted September 25, 2017 Yes, I am with grain it. /woodgraining.com But photos and patterns that we have we have no problem posting them for reference. For hydro guys or hands-on artists. Its all good. Jdee Quote Link to comment Share on other sites More sharing options...
Veemoney Posted September 25, 2017 Report Share Posted September 25, 2017 That is perfection. Quote Link to comment Share on other sites More sharing options...
Silverdome Posted September 26, 2017 Author Report Share Posted September 26, 2017 23 hours ago, Jdee said: Silverdome those came out really nice. Those driftwood colors can be tricky Jdee. Jdee, thanks. I would also like to thank you and your company for your input and support of this lost art. I feel like all information whether it be a success or a failure can be useful. Patience and a good attitude go a long way toward success. 1 Quote Link to comment Share on other sites More sharing options...
Jdee Posted September 26, 2017 Report Share Posted September 26, 2017 So true I gotta mess up a lot of stuff to get at least one thing new working. LOL I found you can use Solarez Fly-Tie ULTRA THIN Bone-Dry for fixing a bad fisheye in clear. You know the one fish eye that just keeps coming back after a re-clear lol, The uv curing with a cheap flashlight is cool.. Jdee Quote Link to comment Share on other sites More sharing options...
Dartgame Posted September 28, 2017 Report Share Posted September 28, 2017 For those of you considering polyurethanes, be mindful that the minwax oil modified urethane is not light stable and will fail after long exposure to sunlight. You can use minwax helmsman which is sunlight stable or an automotive urethane clear. 1 Quote Link to comment Share on other sites More sharing options...
belvedere666 Posted October 5, 2017 Report Share Posted October 5, 2017 So, this thread motivated me to re do my dash that is already out of the car. It was painted with a flat black high temp header paint. I left that as the base. It was already clean and smooth. i applied a rustoleum rattle can medium brown in a really light coat. cut a short coarse paint brush down even shorter and stubbier. used a minwax wood stain cut about 1/2 way with paint thinner. once the brown had a little tack to it, i dipped the brush in the diluted stain and brushed it through. I kept layering the spray paint and the stain and applying different pressure to blend the two colors and this is what I got. I still have to fine sand it and clear coat. 1 Quote Link to comment Share on other sites More sharing options...
Silverdome Posted October 8, 2017 Author Report Share Posted October 8, 2017 On 10/5/2017 at 3:41 PM, belvedere666 said: So, this thread motivated me to re do my dash that is already out of the car. It was painted with a flat black high temp header paint. I left that as the base. It was already clean and smooth. i applied a rustoleum rattle can medium brown in a really light coat. cut a short coarse paint brush down even shorter and stubbier. used a minwax wood stain cut about 1/2 way with paint thinner. once the brown had a little tack to it, i dipped the brush in the diluted stain and brushed it through. I kept layering the spray paint and the stain and applying different pressure to blend the two colors and this is what I got. I still have to fine sand it and clear coat. Looks Great! And yet another way to accomplish a woodgrain finish on metal. 1 Quote Link to comment Share on other sites More sharing options...
belvedere666 Posted October 12, 2017 Report Share Posted October 12, 2017 Finished the P20 dash today. Clear coat, wet sand, last clear coat. Painted the gauge panel and glove box door. I’ll have to do the door and window trim now. 3 Quote Link to comment Share on other sites More sharing options...
40phil41 Posted October 12, 2017 Report Share Posted October 12, 2017 That turned out really nice. Great job and a beautiful dash assembly. Phil 1 Quote Link to comment Share on other sites More sharing options...
46Ply Posted October 12, 2017 Report Share Posted October 12, 2017 Excellent thread on wood graining. Thanks to all those who provided the information. I'd suggest saving this or linking to the technical area. Quote Link to comment Share on other sites More sharing options...
Silverdome Posted October 12, 2017 Author Report Share Posted October 12, 2017 Nice Job belvedere666. 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.