Cudan Posted August 18, 2017 Report Share Posted August 18, 2017 After reading i decided to make my own tool using the old upper pivot bar, pivot bar bushings, 2 bolts with 4 washers and 2 washers. I cut the pivot bar to the right size for mounting the shortened pivot bar bushings. I also welded a washer on the pivot bar bushing. I made the just fitting between the arms and secured it with the 2 bolts on the new pivot bar. I mounted the tool on the new bar and mounted the new bushing a few turn to center the bar, see also the link above. Now i could turn both old bushing out,1/16 inch each to spread the upper arm and mounted the new bushing according, see also the link above. After mounting the bushings i turned the old bushings in and removed the tool, the movement of the new bar and bushing is as it should be. Dan Old pivotbar and bushing converted to miller tool 8 Quote Link to comment Share on other sites More sharing options...
casper50 Posted August 18, 2017 Report Share Posted August 18, 2017 Nice. Quote Link to comment Share on other sites More sharing options...
Mike36 Posted August 18, 2017 Report Share Posted August 18, 2017 Good thinking. Will be useful. Thanks for posting. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.