Jump to content

Empi 32/36 Carb?


NiftyFifty

Recommended Posts

Just a quick ask, how many members are running the Empi 32/36 carb that Langdon's sells for the 2bbl upgrade for the flatheads?  I'm getting exh headers built, and want to go to a 2 barrel on the stock intake, but don't want to order if it's not a good working carb.

 

thanks guys

Link to comment
Share on other sites

Was suggesting VPW as they sell the Weber as a complete kit including adapter. Big thing with a conversion like this is getting the jetting and linkage correct. Can take a while if it isn't close to correct to start with. I imagine VPW has already got these kits set up correctly for our engines. Might at least be worth a call to see if you can get some info on that set up. Something else to consider is that these carbs probably need a good pressure regulator ahead of them. Most Webers seem to work best with about 2.5# of fuel pressure.

Jeff

 

Link to comment
Share on other sites

For the price of that Weber, you could have 2 Matching  Carter B&B carbs, the linkages and stock intake converted to dual intake.

Why on earth would anyone entertain a 2 bbl carbs with an adapter plate.

I once had this idea, then was shown how inefficient that would be.

I would think it might work a bit better with a 2 bbl carb intake, but they did not make one for the long block engines.

I do not see or will ever believe a progressive 2 bbl single carb would ever come close to the performance or efficiency of a dual or tri carb properly set up.

 

Edited by Rockwood
  • Like 1
Link to comment
Share on other sites

Another gem post.......maybe do some reading, it seems to be working quite well for others that have done the swap, thus the reason Langdons sells the kit.  I don't want the hassle of two or three single barrel carbs, and I never asked for opinions on if I should do it....I specifically asked about Empi carbs.

Not hearing much love for the Webber from my buddy running them on his VW, so it's either the Empi or the Ford carb now...just waiting on local pricing on the Empi compared to Langdons.

  • Like 2
Link to comment
Share on other sites

4mula, I have done the reading, and the searches, as I stated at one point in the past I really was quite interested in this swap.

That kit is a piece of scrap aluminum you can get anywhere from a lot of source incl duding fleabay.

Now Langdons carb plate for swapping in a 2 bbl carb might work well for a Stovebolt 6, I have not seen tooo much documented on a Chrysler Flathead.

I almost went that route, but am glad I did not.

You guys who think( a general term) that multi carb linkage is so difficult, have neither owned a set-up, or are just repeating hearsay. Once set-up, what is the issue, not "rocket science". 

I do not see how this set-up with an adapter plate that starts out wide for the carb base and tapers down and restricts flow, great for cylinder 3 and 4, but what about 1,2 and 5,6.

Good luck, I am not putting down what you intend to do, just do not think its the best way to go.

So I invite all of those who have used an adapter plate like the item Langdon sells and has installed a 2 bbl carb on a Chrysler  flathead 6.

I would much rather have a single stock carter B&B or a Stromberg over this arrangement, how about a small 4 bbl carb?

Edited by Rockwood
Link to comment
Share on other sites

1 hour ago, 4mula-dlx said:

Another gem post.......maybe do some reading, it seems to be working quite well for others that have done the swap, thus the reason Langdons sells the kit.  I don't want the hassle of two or three single barrel carbs, and I never asked for opinions on if I should do it....I specifically asked about Empi carbs.

Not hearing much love for the Webber from my buddy running them on his VW, so it's either the Empi or the Ford carb now...just waiting on local pricing on the Empi compared to Langdons.

without causing a fight here.. Tom Langdon sells them because he bought a huge and I mean a huge quantity of surplus  ones a few years ago. If you wish to run 1 2 barrel carb  verses multiple carbs clearly that is your call.    The ones Tom sell are as good as any and we can avoid the discussion of 2 or 3 singles vs a less effective 2 barrel on a flathead.

  • Like 1
Link to comment
Share on other sites

I read different builders on the HAMB and other sites and guys were quite happy with the small boosts of the 2bl and I'm not looking to build a monster, already have that in the rest of my build.  Not to mention, I'm not dropping another $250+ US for a seperate twin single intake, when I can just add my exhaust and a different carb and have everything I need.

 

As for Fred's usual backhanded comments, I've done more work then he has and I also own a dual quad offenhauser for my 383, so I know all I need to about dual linkages and what somebody else wants isn't what I'm after for MY truck.

 

I think sometimes some on here like to interject too much of their opinion (nobody specific) about things that aren't being discussed when the real topic gets washed over.

 

i appreciate the info on the Webber, but I have crossed that off the list, too much money and not great reviews from two people I respect very much here at home.  If anyone is running the Empi I appreciate any feedback, it's still a possibility depending on price.

 

I should mention I'm also looking at Langdons mini hei distributor as apart of this change, so I'm going to be deep into the costs already...I would consider Pertronix, but I feel my dist is too worn out and it's not even a vacuum advance style.

  • Like 1
Link to comment
Share on other sites

5 minutes ago, 4mula-dlx said:

I read different builders on the HAMB and other sites and guys were quite happy with the small boosts of the 2bl and I'm not looking to build a monster, already have that in the rest of my build.  Not to mention, I'm not dropping another $250+ US for a seperate twin single intake, when I can just add my exhaust and a different carb and have everything I need.

 

As for Fred's usual backhanded comments, I've done more work then he has and I also own a dual quad offenhauser for my 383, so I know all I need to about dual linkages and what somebody else wants isn't what I'm after for MY truck.

 

I think sometimes some on here like to interject too much of their opinion (nobody specific) about things that aren't being discussed when the real topic gets washed over.

 

i appreciate the info on the Webber, but I have crossed that off the list, too much money and not great reviews from two people I respect very much here at home.  If anyone is running the Empi I appreciate any feedback, it's still a possibility depending on price.

 

I should mention I'm also looking at Langdons mini hei distributor as apart of this change, so I'm going to be deep into the costs already...I would consider Pertronix, but I feel my dist is too worn out and it's not even a vacuum advance style.

 

4mula as far as your distributor, have you converted a slant 6 distributor for a flathead  distributor, cuz I have undertaken this, not a real tough job, but if you want electronic ignition, you can also do that and add a GM HEI module with it.

Please keep us posted with your 2 bbl conversion as stated above I am not putting your idea down, just show us the results when you are completed.

 

Link to comment
Share on other sites

I have ran a pair of Langdon's carbs on non mopar(gm) with adapters. I liked how they ran and had no problems. Will probably look into them for my 25" later on a homemade intake. If I remember they were on ford escort. 

IMG_1595.JPG

Link to comment
Share on other sites

4 hours ago, sleepy said:

I have ran a pair of Langdon's carbs on non mopar(gm) with adapters. I liked how they ran and had no problems. Will probably look into them for my 25" later on a homemade intake. If I remember they were on ford escort. 

IMG_1595.JPG

Again with all do respect, this is a dual carb intake with adapter plates to run 2 X 2bbl carbs.

This in itself is a much more balanced induction over a single carb to feed 3 siamese ports, not the same at all.

Besides this being a totally off topic "Stovebolt" GM 6 overhead valve engine, again a totally different movie.

The engine has 3 siamesed intake ports as well as 4 exhaust ports, so on this engine you need all the exhaust you can blow out...

Link to comment
Share on other sites

  • 2 months later...
2 hours ago, 55 Fargo Spitfire said:

So any updates from anyone on this "Induction " plan?

Anyone here from Jeff Balazs?

I heard he got tired of the BS and quit the forum

Link to comment
Share on other sites

11 hours ago, Young Ed said:

I heard he got tired of the BS and quit the forum

this is correct.  Jeff has left the forum due to the bickering and BS.

Link to comment
Share on other sites

1 hour ago, Don Coatney said:

Jeff told me he left due to censorship.

I know I haven't really censored anyone (to some people's dismay) but I have given out warnings.  If Tod or GTK did, I didn't know about that.  But my convo with Jeff was around what I said: bickering and bullying BS

Link to comment
Share on other sites

4 hours ago, ggdad1951 said:

this is correct.  Jeff has left the forum due to the bickering and BS.

I didn't realize that Jeff had gotten caught up in bickering and was the subject of bullying, and/or censorship. Damn! I didn't think it was too prevalent on here, until the recent flare-ups about transmissions.

MobRuleOld.jpg

  • Like 3
Link to comment
Share on other sites

Discussions can always become heated on some topics, and sometimes people look to make them heated, or get that rise, but overall I think the forum works pretty good and the mods do a good job...if Jeff left then it's sad, but somewhat his loss for bailing on the situation, rather then trying to help change it.

 

We have strayed pretty far off this topic as is, but I'm fine with that...I'm going in a 180 degree way on this anyway now..lol

  • Like 2
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.

Terms of Use