packratc Posted November 29, 2016 Report Share Posted November 29, 2016 Working on a P19 that had been built years ago. Either it or one of my parts cars had some "T" shipped black plastic fender welting. But it's scraped & cut too rough to use. I put in chrome welting & don't like it. The black "T" welting lays lower than the regular round beaded products. Does anyone know of a source for such a product? It's relatively narrow, kind of like you had cut down the original and rounded off the head. Reading this back it sounds like I'm nuts, I know. Thanks for your help & understanding. Packratc Quote Link to comment Share on other sites More sharing options...
packratc Posted November 29, 2016 Author Report Share Posted November 29, 2016 This post is meant to say "T" shaped & not shipped. Quote Link to comment Share on other sites More sharing options...
DJ194950 Posted November 29, 2016 Report Share Posted November 29, 2016 Like this? www.completeautomobilist.com/products/693-container-wing-piping-tee Quote Link to comment Share on other sites More sharing options...
rb1949 Posted November 30, 2016 Report Share Posted November 30, 2016 Good question, only seeing the round bead welting. My '49 has the stainless and looks nice. Some people paint the vinyl kind. Quote Link to comment Share on other sites More sharing options...
DrDoctor Posted November 30, 2016 Report Share Posted November 30, 2016 Check with Wichita Trimming in Wichita, Kansas. they may have something that would work. Also, Soft Seal deals with GM cars, but they may also have something that would work for you. I've used both firms, and have no complaints with either of them. Good luck. Thx. Quote Link to comment Share on other sites More sharing options...
Young Ed Posted November 30, 2016 Report Share Posted November 30, 2016 I know what you are talking about and if I recall for Dads 51 we had to reuse originals. Quote Link to comment Share on other sites More sharing options...
Plymouthy Adams Posted November 30, 2016 Report Share Posted November 30, 2016 Restoration Specialties has it in their catalog... Quote Link to comment Share on other sites More sharing options...
packratc Posted November 30, 2016 Author Report Share Posted November 30, 2016 The wing piping T looks like the stuff. i had found that but ordering it looked ominous. I'll find my Roberts catalog somewhere. Thanks for the other answers also. Quote Link to comment Share on other sites More sharing options...
Dodgeb4ya Posted November 30, 2016 Report Share Posted November 30, 2016 (edited) Shown is the 1949 and up Mopar "T" shaped plastic rear fender welting... Edited November 30, 2016 by Dodgeb4ya 1 Quote Link to comment Share on other sites More sharing options...
packratc Posted December 3, 2016 Author Report Share Posted December 3, 2016 Looks like the stuff. Mine is a 1950 so the "T" is the factory stuff. Is that what you're saying? DodgeB4ya, where did this come from? Thanks! Quote Link to comment Share on other sites More sharing options...
Dodgeb4ya Posted December 3, 2016 Report Share Posted December 3, 2016 The "T" welting is the factory welting. I bought a roll of it at a closed down dealer in Nebraska years ago. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.