Jump to content

"Willma"


Dave Armstrong

Recommended Posts

This is a post about the work to my on going '47 Desoto business coupe project.

It is just over a year now since I collected Wilma.

20151110_233956853-1328x746.JPG

Part dismantled, with the previous owner having removed quite a bit of the floor complete with the rockers each side.

1450560952287-1328x746.jpg

20151110_233939500-1328x2361.JPG

So what was left of the floor was removed with a few quick cuts with a grinder. Together with expanding foam, pop riveted aluminium, fibreglass and cabinet drawers . 

 

20161024_211205832-1008x1792.jpg

20151207_214455697-1328x747.jpg

A frame was bolted to the chassis and adjustable fixings were connected to the a and B posts to enable the door gaps to be held whilst the repairs started . 

20160326_202002336-1328x747.jpg

Then after some folding ,  bending ,  welding and grinding, new rockers were fabricated and welded in. These are not to the original shaping, but having nothing to go by for a reference a redesign was needed

 

20160911_204815082-747x1328.jpg

Continued on next post........

 

20160320_231248100-1328x747.jpg

20160316_215837468-747x1328.jpg

20160316_215838421-747x1328.jpg

Edited by Dave Armstrong
  • Like 1
Link to comment
Share on other sites

Other parts of the center of the car together with the a and B posts were repaired 

20160316_215838421-747x1328.jpg

20160320_231248100-1328x747.jpg

20160911_204815396-1328x747.jpg

The pedals have been fabricated onto a modern 7"servo and better master cylinder assembly and fitted order the floor

20161024_211204868-1008x1792.jpg

The floor was framed and panelled over.

20161030_192624949-1328x747.jpg

20161120_211608014-1008x756.jpg

20161120_211606802-1008x756.jpg

So this is where it's at now. Still a long way to go ,  but very enjoyable . I will endeavour to try and keep the progress updated as I go.

I'm in need of the external chrome fittings that bolt through the windscreen scuttle to the wiper motors. If anyone has any . 

Will post again soon

Ta Dave  ( UK)

  • Like 1
Link to comment
Share on other sites

Dave that's some serious skills you have there  I've used a bead roller in the past myself but how did you make the impressions in the panels, did you use some kind of press with punch and die?

Link to comment
Share on other sites

17 hours ago, Flatie46 said:

Dave that's some serious skills you have there  I've used a bead roller in the past myself but how did you make the impressions in the panels, did you use some kind of press with punch and die?

Hi. I used the step/flange dies, mark the lines to form the shape, be it rectangle /triangle etc and radius the corners. Then follow the lines with light pressure, and follow again with more pressure each time. It will distort the panel but put it on a flat surface and beat it with a mallet to flatten 

Link to comment
Share on other sites

Dave,

   I really must say that those floor panels look fantastic. What with those impressions made in the panels, they shouldn’t “oil-can” on you, and make any unwanted creaks, not to mention that the floor looks as tho’ it’s going to withstand any weight subjected to it. I wish my car’s floors looked that good. Thank goodness the top of it is covered with carpet, and the bottom of it is covered with undercoating, and a few years worth of road crud. Anyway, a great job – one you should be justifiably proud of.   Thx.

Link to comment
Share on other sites

  • 4 months later...

Dave,

Great work on the fabrication, being in Kent there is most likely are not too many of these around. There is a UK P15 club on facebook I think. I wish Plymouth had the Desoto grill.

Keep the photos going Sir!

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.

Terms of Use