weasel Posted September 24, 2016 Report Share Posted September 24, 2016 Has anyone replaced the stock steering box with a new one? My is worn out has to be swapped. Quote Link to comment Share on other sites More sharing options...
Dave72dt Posted September 24, 2016 Report Share Posted September 24, 2016 As in NEW new? You won't find those. Boxes are usually rebuildable, several sources for that if needed or it's fairly simple to do on your own if the internals are still good. Have you tried adjusting the box first and/or eliminated any other points of excessive movement? Service manual can walk you through the adjustment process step by step. If thinking of a more modern box that will bolt in with some fab work, you may want t look at a Toyota box. I've heard they were used on Ford pickups of the era and the steering design is similar. Whether or not it's close enough to make work or has been used on a Dodge, can't say for sure. Quote Link to comment Share on other sites More sharing options...
P15-D24 Posted September 25, 2016 Report Share Posted September 25, 2016 Check the Links page for rebuilders. Quote Link to comment Share on other sites More sharing options...
John Zellmer Posted October 6, 2016 Report Share Posted October 6, 2016 Hi, RockAuto handled the rebuild of my B2B box. It was completely worn out and required machining of new parts. Total cost was about $450. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.