Jump to content

Oil bath filter versus paper filter?


central52

Recommended Posts

All you have to do is wash the horse hair section in kerosene to clean it.  It's easy.  I'd never give up the oil bath air cleaner as it gives the car some of its personality and makes it different from modern era cars.  I'd also never change over to a 12 volt negative ground system for the same reason. 

 You can't really see the horse hair very well . After 60 or 70 years a guy could wonder how well it is holding up and if there is any dirt build up around the edges that hasn't been washed clean . 

Link to comment
Share on other sites

Ok,,,,,oiled foam over a K & N.......inside the oil bath filter housing.

 

Jeff

I am with you on this one Jeff.    

My cycle came with a foam filter, lasted 9 years,

and then I replaced the foam filter with a foam filter I cut

from a couch cushion, that was still good for 8 more year

when I sold the bike....

The carbs still looked like new inside...

Link to comment
Share on other sites

Personal preference, I'd say, along with originality considerations for points and such.  The main reason I have a paper element filter on the D24 is that it did not have an air filter at all when we got it, and I already had a period aftermarket paper element filter on hand.  Haven't even bothered to look for an oil bath filter for the car.  The shows we take it to don't care if the car has an original air filter or not.  As Don notes, there has already been quite a bit of discussion regarding which is more efficient, but I don't remember the arguments for or against, and will defer to an appropriate search before I stick my foot in my mouth.....    

Link to comment
Share on other sites

Any hill your car is capable of climbing will not result in the loss of oil from the air cleaner housing :D

 

 

EDIT: I suppose I should add that is base on the assumption that it is not severely overfilled.

Edited by shel_ny
Link to comment
Share on other sites

I've still got my original Oil Bath Filter, in pretty good shape. Cleaned up and modified a spare filter that was in kind of sad shape. Here's my results and the air filter cartridge that I used.

 

MyAirFilterampCart_zpsed5877be.jpg

 

Be sure your filter is tall enough. Otherwise the bottom edge of the top will suck down to the base and block airflow. Of course, you could always go up higher removing the sides of the top.

 

John

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.

Terms of Use